valve clearance needs to be adjusted
it depends on the year anything 83 to 85 most parts r interchangeable
I own a atc shop in southern calif. I have seen hundreds of these bikes come through here and I would place the value of a Honda 200s around $500-$1100 depending on the condition. Hope this has helped.
250x is a 4 stroke. The only 2 strokes Honda ever made were the 250R ATC and ATV.
the valve clearance is 0.002" on both intake and exhaust.
no the 350x is lighter its also 2-stroke!!!!!
No it does not, it's a 4 stroke.
Takes the same size as a 185. DR8ES-L
Jack the vehicle up. Make sure the vehicle is on a jack stand. Remove the wheel nuts, by turning them to the left. Remove the wheel.
The ATC 250R (1981-1986) is a two stroke. Otherwise, all Honda three wheelers were 4 strokes.
It's a 4 stroke. Use regular gas!
If you do not still have your chain tensioner attached you need to slack the four bolts on rear end housing pull rearend tight as possible and retighten your four bolts
50cc 4-stroke 50cc 2-stroke,65cc 2-stroke, 70cc 4-stroke, 80cc 2-stroke, 85cc 2-stroke, 110cc 4-stroke, 125cc 2-stroke, 125cc 4-stroke, 150cc 2-stroke, 150cc 4-stroke, 200cc 2-stroke, 250cc 2-stroke, 250cc 4-stroke, 300cc 2-stroke 350cc 4-stroke, 450cc 4-stroke, 500cc 2-stroke, 530cc 4-stroke, 690cc 4-stroke
The ATC 25OR ATV by Honda was produced in 1981-1986. It was used during that time for the vehicles that used an air cooled 248 cc single cylinder two-stroke engines.
it is a 2 stroke
Factory carb settings for a 84 Honda 200s
Its a 2 stroke for sure
Are 1980 arc two or four stroke