0
If the end of the hose is running in a pool of water, yes
Wiki User
∙ 15y ago
Add your answer:
Earn +20 pts
How do I siphon gas out of a 2004 Doge intrepid?
With a water hose -Old school
How do you stop a marine mercury bilge siphon pump allowing water in to the boat?
If your engine is a sportjet, it probably has a bilge siphon system that connects to the pump. If so, the siphon hose must be "looped" from the pump above the water line, then back down to the bilge. This should prevent water from backwashing through the hose into the bilge.
Can you siphon gas from a Chevy Suburban?
In order to siphon the fuel out of the tank you need to remove the fill hose from the tank. The hose is difficult to get to but it can be done. Once the fill hose is removed you can then slip your siphon hose into the tank. Try not to allow any dirt to get into the tank during the process.
How do you siphon fuel from a 2006 Chevy Equinox that does not allow complete insertion of a siphon hose due to an anti-siphon device?
you cant
What is the easiest and quickest way to siphon water from a wading pool with a garden hose without use of a pump?
If you have a low spot that you could put the end of a hose, than you could hook a hose to the other end and feed it water to get the flow started. After getting the water running, hold the connected ends under the water in the pool and take them apart. Keep the end from the hose going to the low spot under the water. Have something handy to put on the end in the pool to hold it down to the bottom. If there is no are leaks in the hose and you keep the end under water, it should mostly drain the pool.The discharge end of the hose must be lower than the intake end. When the level of water in the pool falls to the same level as the discharge end, the siphon will stop flowing. To drain a pool completely, the discharge end must be lower than the lowest spot in the pool and the intake end must be place at that spot. To start the siphon you can immerse the hose completely in water to get all the air out, plug the discharge end of the hose with your thumb or a suitable cap as you drag it over the side of the pool, and uncap it when the discharge end is at a low point. This method of starting a siphon avoids sucking or inhaling on the hose end, with the attendant risk of aspirating contaminated water into one's lungs.
Does the diameter of a hose effect THE SPEED of water in a siphon?
No it does not, siphonage is due to inbalanced pressure or incorrect atmospheric pressure in a geyser
How do you siphon gas from Isuzu trooper?
My guess, after a quick look, is to remove the hose clamp where the fill hose empties into the tank and siphon from there. I ended up here because I was looking for a way to bypass the anti-siphon block. Kevin
How do you remove gas from a 2001 Malibu?
Siphon it with a hose and your mouth.
How do you take petrol out of your tank?
Accelerate real hard and don't stop You can siphon the fuel out. Sometimes it is necessary to remove the filler neck hose from the tank in order to insert a siphon hose.
How do you get a fuel sample from your gas tank?
A siphon hose down the the fill tube.If you don't have one of those, any hose will do but you'll have to suck on it to get the siphon running.TIP: spit, don't swallow
What is a siphon?
A siphon is a tube that is used to take a liquid up and out of one container and into another container or the ground. A hose used to empty a swimming pool can be called a siphon.
How do you remove gas from anti- siphon gas .dodge ram?
You remove the filler hose off of the side of the tank, and siphon out of there.
