Cobalt is ferromagnetic, but considerably less so than iron. Alloys of cobalt such as aluminium, nickel, cobalt and iron, known as Alnico, and of samarium and cobalt (samarium-cobalt magnet) are commonly used to make high quality permanent magnets.
Yes. Cobalt has ferromagnetic properties, and it is used in the preparation of magnetic, wear-resistant, and high-strength alloys.
It shouldn't be under normal circumstances, unless it has undergone a ferromagnetic process.
Yes. Nickel, iron and cobalt are the only elements to be attracted to magnets under normal circumstances.
yes it is Major Loser
Cobalt is a ferromagnetic metal.
No, it is a non-magnetic material
Cobalt is a hard magnetic material
yes
yea
Hard magnets are those which require a high magnetic field so as to be magnetized. Soft magnets are those which acquire high magnetic flux when a little magnetic force is applied onto them.
Soft iron is having very low hysteresis loss. So it would be good to use it as core.
Vinyl can be as hard or soft as you want. You can make soft vinyl upholstery, or vinyl drain pipe so hard you can park a car on it without having it break.
Supermalloy is a metal alloy that is 79% nickel, 5% molybdenum and 16% iron. It is used in mechanical and electronic components like hard drives. It is disigned to have a very high magnetic permeability and a low coercivity, meaning that magnetic fields can flow though it very easily. It is also a soft magnetic material, meaning that it doesn't stay magnetized itself once the magnetic field is removed.
I assume you mean "soft iron" ... so that it quickly loses its magnetism when the current flow stops.
The magnetic materials which can magnetise and de-magnetise easily are called "soft magnetic materials" example:-ferrites,iron-cobalt alloy. The magnetic materials which cannot magnetise and de-magnetise easily are called "hard magnetic materials" example:-aluminium(al),nickel-cobalt alloy.
A soft magnet's magnetic field can be broken easily. A hard magnet's magnetic field can not be broken easily.
Hard magnets are those which require a high magnetic field so as to be magnetized. Soft magnets are those which acquire high magnetic flux when a little magnetic force is applied onto them.
Because pure iron can gain or lose a magnetic field very quickly. A hard magnet (certain steels) will hold its field indefinitely (unless heated to too high a temp).
Colour: black, opaque. Streak: black. Lustre: metallic or dull. Cleavage: none. Hardness: 5.5-6.5. Specific Gravity: 5.2. Its diagnostic feature is that it is highly magnetic.
Materials which retain their magnetism and are difficult to demagnetize are called hard magnetic materials. These materials retain their magnetism even after the removal of the applied magnetic field. Hence these materials are used for making permanent magnets. In permanent magnets the movement of the domain wall is prevented. They are prepared by heating the magnetic materials to the required temperature and then quenching them. Impurities increase the strength of hard magnetic materials. Soft magnetic materials are easy to magnetize and demagnetize. These materials are used for making temporary magnets. The domain wall movement is easy. Hence they are easy to magnetize. By annealing the cold worked material, the dislocation density is reduced and the domain wall movement is made easier. Soft magnetic materials should not possess any void and its structure should be homogeneous so that the materials are not affected by impurities.
Yes, all steels are magnetic. The difference is in the material being a "soft" or a "hard" magnetic material.A cold rolled mild steel, such as 1018 steel, is considered a "soft" magnetic material.I recommend reading "ASM Ready Reference: Electrical and Magnetic Properties of Metals" by Charles Moosbrugger and Fran Cverna for reference details and information. Particularly the brief section of Chapter 7 would be most helpful to you, with values in Chapter 8.
Materials which retain their magnetism and are difficult to demagnetize are called hard magnetic materials. These materials retain their magnetism even after the removal of the applied magnetic field. Hence these materials are used for making permanent magnets. In permanent magnets the movement of the domain wall is prevented. They are prepared by heating the magnetic materials to the required temperature and then quenching them. Impurities increase the strength of hard magnetic materials. Soft magnetic materials are easy to magnetize and demagnetize. These materials are used for making temporary magnets. The domain wall movement is easy. Hence they are easy to magnetize. By annealing the cold worked material, the dislocation density is reduced and the domain wall movement is made easier. Soft magnetic materials should not possess any void and its structure should be homogeneous so that the materials are not affected by impurities.
Soft iron is having very low hysteresis loss. So it would be good to use it as core.
hend riting to peper is hard copy and computers document file is soft copy
Vinyl can be as hard or soft as you want. You can make soft vinyl upholstery, or vinyl drain pipe so hard you can park a car on it without having it break.
It is soft in nature . Because of its dramatic color change and the ease of the hydration/dehydration reaction, "cobalt chloride" is used as an indicator for water in desiccants.Its formula is CoCl2.6H2Ofrom: Shilo Kim JohnsonRead more: Is_cobalt_chloride_hard_or_soft