With a compressor bypass kit from a part store.
Between and under the alternator and ac compressor.
On a Dodge Neon, the coolant bypass hose is in the engine compartment. It is under the alternator and AC compressor. Both have to be removed before you will see the hose.
found this bypass pulley: http://www.1aauto.com/1A/ACBypassPulley/Dodge/GrandCaravan/1AEPM00050/1089407
The serpentine should route the same as with the AC except fro the AC compressor. The belt will go straight past the compressor, so you will need a shorter belt to make the bypass work.
Yes, most part stores sell a bypass kit.Yes, most part stores sell a bypass kit.
You can't bypass with a belt alone. You have to by a bypass pulley kit. The new pulley takes the place of the ac compressor and you use the same size belt.
bypassing the a/c compressor is easy, all you need to do is buy the buypasser kit from an autoparts store, or a website like www.summitracing.com they have the pulley on there.
Yes, but if you unplug the wiring to the compressor, the pulley will simply idle without causing the compressor to do anything, unless the pulley clutch is faulty and is constantly engaging the compressor, in which case, you will have to bypass the compressor pulley or replace it. If you must bypass the air conditioner, you will need a shorter belt (by at least 12 inches). It is possible that the stock belt for your motor without air conditioning option will fit, try that option first. Otherwise the proper fit will have to be determined by trial and error or use string to trace the new route and measure its length. The new route should be exactly the same except bypassing the compressor.
get a piece of rope and a tape measure. problem solved Not sure about a '99, but on the 2000, with 4.7, you can't bypass the a/c unless you buy a idler pully that's mounted on a bracket to replace the a/c compressor.
The ac compressorThe ac compressor
Probably by the passenger firewall near the drier--follow larger line from compressor
How do you bypass the alarm system on a 1990 Dodge Dynasty?
Follow larger line from compressor--may be near drier on passenger side firewall
haah on the steering wheel! Horn on my 1992 Dodge Shadow 2.2 non turbo is located in the engine compartment, passenger side to the left of the AC compressor bolted to the chassis.
Bypass the air conditioning on a 1998 Dodge Stratus with a smaller serpentine belt.
Front of the passenger side of engine. Look up and behind the ac compressor.
You have to remove the air conditioning compressor bolts set the unit aside but do not remove the freeon hose. Then remove the mounting bracket and then you can get to the bypass hose to replace it. Replace mounting bracket and compressor and job is complete
Follow lines from compressor--Larger is low pressure--port may be near drier/accumulator by passenger firewall
No, you have to buy a compressor.No, you have to buy a compressor.
The A/C compressor is driven by a belt. Follow the routing of the belt and you will find the compressor.