You do not lubricate a clutch - You clean it. If you lubricate it will slip and it will collect dust and dirt from the belt and it will bung it up..
A 2002 Wrangler has a non adjustable hydraulic clutch.
How to change a clutch and master cylinder on a 93 jeep wrangler
it may bind when using the clutch, it will squeal when not using the clutch, and stop when you do. You may also feel or hear a constant grinding like noise, this is the bearings going bad.
The clutch is not adjustable.
you cant it is a hydrolic clutch
How do you replace the clutch slave cylinder on a 1989 jeep wrangler
the same as any other clutch.
Inadequate oil in a/c comp, bad bearings,bad clutch are possible causes.
you cannot adjust you need new clutch.
This should have a hydraulic clutch and would not be adjustable
You may have to have your clutch adjusted,
No.The clutch is hydraulic and not adjustable.
with just this info it's possible your a/c clutch bearings are going bad with just this info it's possible your a/c clutch bearings are going bad
It is not adjustable.
You dont it adjusts its self. if its slipping you nead a clutch.
Either the pump bearings are bad or the ac clutch is going bad. The clutch can be replaced but the pump bearings are not generally cost effective to change.
You do not "lube" a centrifugal clutch. http://www.snowmobileforum.com/engine-drivetrain/26360-generic-clutch-cleaning-advise.html
you might have a air in your clutch system or your clutch master/or slave could be worn.
No, oil will ruin the clutch. Noise that sound like you need oil means a bearing or the compressor has failed.
replace the bushing where the clutch pedal attaches to the master cylinder arm.