Mobile Phones
Audi
Telephones
Wireless Communication

Is it really necessary to install a separate antenna as the manual suggests when using your cell phone?

464748

Top Answer
User Avatar
Wiki User
Answered
2005-09-08 23:31:37
2005-09-08 23:31:37

yes from what i understand, using the radio antenna can mess up your radio and your cell phone

001
๐Ÿ™
0
๐Ÿคจ
0
๐Ÿ˜ฎ
0
๐Ÿ˜‚
0

Related Questions


Remove the old antenna. Attach the universal antenna to the radio and replace the radio after finishing the task. Install the new antenna. Test to ensure the wiring works.

Begin by removing the antenna cable from the bottom of your 2003 Pontiac antenna. Remove the antenna retaining nuts. Reverse the process to install your new antenna.

Begin by removing the wiring harness from your Volvo antenna. Remove the antenna retaining nuts. The antenna will come off. Reverse the process to install your new antenna.

You can replace your 2003 Toyota Echo antenna. Remove the antenna retaining nut. Remove the cable from the bottom of the antenna. Reverse the process to install the new antenna.

Remove the wiring harness from the and of your 1997 Chevy Lumina antenna. Remove the antenna retaining nuts. Reverse the process to install the new antenna.

The cost of installing a digital antenna can vary widely depending on where the antenna is being installed. Often you can install the digital antenna yourself for free.

you have to remove the fender

Take the new antenna and your RX300 to Circuit City. They will install it for about $50.

Begin by removing the wiring harness from the bottom of your antenna. Remove the antenna retaining nuts. Reverse the process to install your new antenna.

Begin by removing the wiring harness from your 1992 Nissan antenna. Remove the antenna retaining nuts. Reverse the process to install your new antenna.

Begin by removing the cable from the bottom of your 1997 Ford Taurus antenna. Remove the antenna retaining nuts. Reverse the process to install your new antenna.

Sure you can. Just wrap it around your car's antenna.

To install a manual antenna on a 1996 Toyota Camry, a hole will have to be drilled into a fender somewhere near a side mirror, if there isn't already one there. The hole should be smaller than the nut that will hold the antenna on. Thread the antenna wire in and connect to the back of the radio, then tighten down the nut to hold the antenna in place.

No you do not need a digital tv if you have a digital antenna. But you will need a digital to analog converter box if you have an analog tv and a digital antenna.

Remove the wiring harness from the bottom of your 1987 Buick Regal power antenna. Remove the power antenna retaining nuts. The power antenna will come off. Reverse the process to install the new power antenna.

Remove the wiring harness from the bottom of your 1987 Chevy Corvette power antenna. Remove the power antenna retaining nuts. Reverse the process to install your new power antenna.

Remove the wiring harness from the bottom of your 1996 Mercury Cougar automatic antenna. Remove the retaining nuts at the bottom of the antenna. Reverse the process to install your new automatic antenna.

The stock roof-mounted antenna on the 2005 Toyota Matrix will unscrew from the antenna base that is attached to the roof. If your original antenna has been stolen, you should be able to obtain a replacement antenna and just screw it on the the antenna base that is still attached to the roof of your Matrix.

thru the wheel well.take out the liner.

Click the install as partition when installing Ubuntu.

That's a real problem as the antenna is integrated into the rear passenger side window.A possible alternative would be to install a new, stand-alone universal type antenna.Not easy, but doable.

You would need to get a tool to remove the notched chrome piece that holds the antenna mast, or carefully use pliers to unscrew it out. After you remove that, the antenna itself is held by a 10mm bolt. to get to it you'll need to open up the trunk lining near the antenna location and remove that bolt. Then, pull the antenna far enough to disconnect the antenna wire and power. Assuming the antenna motor is still functional, you can then replace the antenna mast with a new one. Or, you can install an aftermarket rubber antenna.


Copyright ยฉ 2020 Multiply Media, LLC. All Rights Reserved. The material on this site can not be reproduced, distributed, transmitted, cached or otherwise used, except with prior written permission of Multiply.