Plastic wrapped around the wire is insulator. Not a conductor. That is why it is wrapped around the conductor wire.
Nothing happens. The wire will still conduct electricity. An example of this is the overhead utility wiring. The insulation on a conductor is there strictly to keep the conductor from touching any thing that would ground the conductor. This grounding could be from another adjacent conductor or a grounded medium around the conductor. A grounded conductor will trip the over current protection and trip the circuit off line. Without an insulation on the wire multiple wires in a conduit could not be utilized.
The plastic is a form of insulation. Insulation used to be made from non-plastic materials like cloth. It protects the wire from the outside world. Without insulation the electricity would cause shocks, fires, and short circuits.
clamp is an electrical device having two jaws which open to allow clamping around an electrical conductor. This allows properties of the electric current in the conductor to be measured, without having to make physical contact with it, or to disconnect it for insertion through the probe.
Well, it CAN be wrapped either way, but because standard screws tighten when turned clockwise:if the wire is wrapped around the screw clockwise tightening the screw will pull the wire tighter around the screwif the wire is wrapped around the screw counterclockwise tightening the screw will push the wire away from the screw making it loose and maybe even popping the wire out from under the screwSo, if you want the wire to stay secure on the screw only wrap it clockwise!
A magnetic field.
Copper is ideally used in wires in the creation of a household electric wire. this is because, copper is a very good conductor of electricity. to avoid anyone from getting shocks the copper wires need to be insulated by an insulating material, ideally plastic that is wrapped around them.
When electric current flows, a magnetic field is formed via induction. When copper wire, or another conductor is wrapped around a metal core, it forms an electromagnet.
Plastic cone
Copper is ideally used in wires in the creation of a household electric wire. this is because, copper is a very good conductor of electricity. to avoid anyone from getting shocks the copper wires need to be insulated by an insulating material, ideally plastic that is wrapped around them.
You more or less just answered your own question. Most plastics are not good conductors, so the best path to ground for the electricity flowing in the wire is to stay in the wire rather than jumping through the plastic (poor conductor) and person (middling-to-fair conductor).
Electrical tape and any non-conductor material such wood or plywood guard, glass and rubber.
Then an 'electrical current' is said to be present in the conductor.
Plastic being nonconducting, it avoids electrocution when covered around electric wire.
Electromagnetism
Clean, unused aluminum foil can be wrapped around the food directly, or it can be wrapped around a plastic or glass container that the food is in (depending on the consistency of the food).
Cases have been made of wood, various metals, plastic, bakelite, fiberglass, and perhaps others. Plastic is widely used now primarily because of its low cost and ease of forming complex shapes.
Electric current causes magnetic field around conductor by producing a moving electric charges and the intrinsic magnetic moments of an elementary particles that is associated with a fundamental quantum property.