No, it is not always pure. In nature it is considered the purest form of water, which it is. However as it falls to the ground it mixes with a large number of impurities present in the air and hence becomes impure.
Wiki User
∙ 12y agoTo produce rainwater, it first evaporates, only collecting pure water with nothing else, then it condenses into clouds, that are still made of pure water. When it becomes rain, it is still pure water, so it will not conduct electricity well. It's molecules carry no electric charge and there are no ions in solution to carry charges, so it would not be a good conductor.
I'm assuming the question to be as follows What is the purest form of water? The purest form of water would be where every molecule in the given container is 2 parts Hydrogen and one part Oxygen. Rainwater is considered one of the purest forms of water because it is essentially the process of distillation used in laboratories to generate high purity water. However, Rainwater does contain traces of minerals, dust, pollutants from the atmosphere etc., But for all practical purposes, Rainwater is one of the purest forms of water. However 100% pure water is close to impossible to create. Just the way 100% pure vaccum or 100% pure gold. There are bound to be contaminants at the most microscopic level. The contaminants are usually measured as ppm (Parts Per Million). The permissible limit varies from country to country depending upon the standards of living but 500 ppm or less of dissolved solids can be considered pretty pure.
If you let your tap water sit for a couple of hours, exposed to the air, the chlorination will evaporate, and you will have something equivalent to rainwater.
Water conservation is promoted through rainwater harvesting.
Rain water is fresh water and does not have salt. Saltwater is not fresh and does have salt.
Pure water has a ph of 7.
yes its made of oxygen and hydrogen
No, rainwater would be pure water if it weren't for the contaminates is picks up from the air while falling.
Pure water (distilled and non-aerated) would have a pH value of 7.0
Virtually none. Ever fresh rainwater or snow has dissolved impurities in it.
To produce rainwater, it first evaporates, only collecting pure water with nothing else, then it condenses into clouds, that are still made of pure water. When it becomes rain, it is still pure water, so it will not conduct electricity well. It's molecules carry no electric charge and there are no ions in solution to carry charges, so it would not be a good conductor.
Because rainwater, with the different chemicals and elements in it, is very slightly acidic.
As i fell ground water is the purest form of water. As rain water may consist bad Bacteria but ground water does not as it is purified by the ground.
Rainwater didn't start pure. It is contaminated with airborne particulates and dissolved gases from the beginning. If you want it to be clean, you can filter it and boil it to kill the bacteria that are in it.
The best way to simulate rain water for your plants is to use distilled water. It will provide a pure form of water which is free of chemicals found in tap water.
Calcium carbonate is practically insoluble in pure water; if the rain water is acid calcium carbonate may be dissolved.
If you want to make distilled water from rainwater, you would perform distillation on the rainwater.