No, a resistor isn't measured at all. A resistor has a quality called "resistance" - and that value is measured. Resistance is measured in Ohms.
Amps (ampere).
Electric current is measured in amps not voltsElectric voltage is measured in volts.
The resistor is 1/3 of an ohm. A 9 volt drop across the resistor would cause a draw of 27 amps through the resistor. The wattage you would need for that resistor is at least a 243 watts.
V = (I) x (R) = 2 x 12 = 24 volts
3.0 or threeAnswerIt depends how they are connected.In series, ther total resistance will be 220 ohms and, so, the current will be 120/220 = 0.545 A.In parallel, ther total resistance will be 20 ohms and, so, the current will be 120/20 = 6 A.
Just add the amps (3.2 amps).
Resistance is measured in ohms.
voltage is measured in terms of volts ; current is measured in terms of amps.........................................
Ohm's law: Volts = amps times ohms In the case of a 4 ohm resistor with 1.5 amps of current, the voltage is 6 volts.
The electrical current in a circuit is measured in amps.
An electric flow, is Current. Measured in Amps(Amperes)
V = IR Voltage (V, measured in volts) = Current (I measured in amps) times Resistance (R, measured in Ohms) Is your current 3.13? I'm not sure what you wrote there, but just multiply your current times your resistance.
0.5 amps
if not disconnected you will measure the resistance of the circuit in parallel with the resistor.
amps
amps
A; By using a voltmeter across a small shunt resistor