0
I believe so , it has the same firing order as the High Output
Wiki User
∙ 13y ago
Add your answer:
Earn +20 pts
What is the horsepower of a stock 1995 mercury moutaineer with a 302?
The ( 1997 ) Mercury Mountaineer , which was the first model year , had a 302 / 5.0 litre V8 engine rated at ( 210 horsepower )
What type of oil does a 1997 mercury mountaineer use?
On a 1997 Mercury Mountaineer : ( 5W-30 ) for the 5.0 liter / 302 cubic inch V8 ( with filter change , 5.0 U.S. quarts / 4.7 litres of engine oil ) According to the Owner Guide
Where do you add oil to a 1997 Mercury Mountaineer?
On a 1997 Mercury Mountaineer : The engine oil filler tube for the 5.0 litre / 302 cubic inch V8 engine is on the valve cover of the engine , on the right side ( passenger side ) near the front of the valve cover
How much horsepower does a Mercury Mountaineer have?
215 horsepower ford 302 v8
What is oil capacity for 97 mercury mountaineer V6?
The only engine available in the 1997 Mercury Mountaineer was the 5.0 liter ( 302 cubic inch ) V8 and with engine oil filter change it took ( 5 quarts / 4.7 liters of engine oil )
What is the Spark plug gap on a 1997 Mercury Mountaineer?
According to the 1997 Mercury Mountaineer Owner Guide : For the 5.0 liter / 302 cubic inch V8 engine : ( the spark plug gap is .052 to .056 inch ) * confirm with the Vehicle Emissions Control Information ( VECI ) decal in the front of your engine compartment
What is the oil capacity for 97 Mercury Mountaineer V 8?
According to the 1997 Mercury Mountaineer Owner Guide : For the 5.0 liter / 302 cubic inch V8 engine : With engine oil filter change : ( 5.0 U.S. quarts / 4.7 liters of 5W-30 engine oil )
Do you have a firing order diagram for a 1997 5.0 Ford Explorer?
1-4-2-5-3-6 This is not correct....the firing order given here is for a 6-cylinder motor..... firing order for the 1997 Ford Explorer & Mercury Mountaineer (the only vehicles in 1997 with the 302 - 5.0) is same as the 351 motor; 1-3-7-2-6-5-4-8
How many quarts of oil for Mercury Mountaineer 2000 v8?
According to the 2000 Mercury Mountaineer owner manual : With engine oil filter change : The 5.0 L / 302 cubic inch V8 engine takes : ( 5.0 U.S. quarts of 5W-30 )
How hard is it to change a oil pump in a 1997 mercury mountaineer and is it the same as oil sending unit?
On a 1997 Mercury Mountaineer , 5.0 liter ( 302 cubic inch ) V8 engine : The engine oil pump is INSIDE the engine oil pan According to my Haynes repair manual in order to remove the oil pan ( to get access to the oil pump ) THE ENGINE HAS TO BE REMOVED * the engine oil pressure sending unit is on the OUTSIDE of the engine beside the engine oil filter
Where is the diagram for connecting the plug wires to the coil packs on the 1997 Mountaineer?
A 1997 Mercury Mountaineer - 5.0 L ( 302 cubic inch ) V8 coil packs are numbered : ( 4 - 7 )-----------( 3 - 5 ) ( 8 - 2 )-----------( 6 - 1 ) ------------front---------- The engine cylinders / spark plugs are numbered : firewall 4 - 8 3 - 7 2 - 6 1 - 5 front of engine
How many PCV valves does a 1997 Mercury Mountaineer have?
( 1 ) PCV valve for your 5.0 liter / 302 cubic inch V8 The Owner Guide shows Motorcraft EV-152 and fordparts.com shows Motorcraft EV-152-D as the part numbers
