Only the 5-speeds. You can't swap automatics without running into problems, and you can't swap an automatic for a 5-speed without modifying (and it will still throw an engine code afterward). A 1992 Corsica had a 3T40 automatic, and the 1995 Beretta had a 4T60E automatic. Your best bet is to swap in another 4T60E. It came in a lot of GM vehicles. Go to car-part.com and enter "1995 Chevy Beretta automatic transmission" in the search for a list compatible transmissions and prices in your area.
where would i locate the fuse for the fuel pump on a 1995 Chevy corsica
removal of 95 chevy corsica
A Haynes or chiltons manual has the how to. Or do a search for a forum for Chevy corsica specific
Because its a Chevy corsica not a ford corsica!!!!!
the beretta and lumina motors are about the same i have a lumina motor in my 95 beretta
Correction: It is a 1995 Chevy Corsica. Not a 1996.
The side view mirror on a 1995 Chevy Corsica is mounted by screws. Remove the screws and panel for the mirror on the inside of the vehicle. Pull and replace the unit.
inside the transmission bell housing
Behind the fuel tank.
The temperature sending unit for a 1995 Chevy Beretta is on the front of the engine. It is between the front of the engine and the radiator inlet/outlet.
take out the 2 bolts that hold it
then there is a short some where!
In the gas. Of course.
Low pressure valve.
Follow the upper radiator hose to the engine. It is behind there.
As long as the are both front wheel drive.
Under dash, near firewall, passenger side.
I find that Autozone is very helpful in answering automotive questions.
Check out the top of the fuel tank and the tubes leading to it.
Place a drip pan beneath your 1995 Chevy Corsica oil pan. Remove the oil pan plug. Allow the oil to completely drained out. Replace the oil pan plug to its original position. Fill the motor with oil.