Is their a warranty on the fuel sending unit on a 2003 Kia Sorento?

The 2003 Kia Sorento runs on regular unleaded.

With the electric fuel pump inside the fuel tank

It is on the fuel sending unit that is inside of the fuel tank.

The fuel level sensor is on the fuel pump module in the fuel tank.

fuel pump sending unit is in the fuel tank you must lower

the fuel sending unit is located inside the fuel tank.

The 'vent valve' is a breather... it has no moving parts... they're typically placed at the top of the fuel tank.

It is on top of the fuel pump sending unit assemply which is located in the fuel tank! The only way to get the fuel filter is to buy the sending unit.

I asked the dealer to change the fuel filter on our 2003 KIA Sorento and they said it's inside the tank and never needs to be changed, unless there is a problem. I am not sure if that's true with newer Sorento's.

The fuel sending is located in an access panel under the carpet in the trunk. It is actually part of the fuel pump. Im not quite sure how to replace it but you can get one from a junkyard for 100$ with a 90 day warranty

Inside the fuel tank with the electric fuel pump

It is inside of the fuel tank attached to the fuel pump sending unit.

The fuel sending unit in a 2003 KIA Sedona is found under the rear passenger seat. There are some plastic heads which hold the locking ring and have to be removed for you to access it.Ê

Inside the gas tank combined with the sending unit for the fuel gauge

From what I've researched so far, fuel filter on 2011 Sorento V6 is integrated into the fuel pump.

You can't, the fuel filter is a part of the sending unit and would require you remove the fuel pump.

You will have to replace the fuel module which consists of the pump, sending unit and sock filter. Which means you will have to remove the fuel tank.

The fuel sending unit is part of the fuel pump in the gas tank and both must be replaced to fix the problem. The fuel pump is part of the 100,000 mile warranty.

Sorry , no - the fuel tank has to be dropped in order to change the fuel pump or sending unit for the fuel gauge

That is the float on the side if the pump module in the fuel tank, that relays the amount of fuel to the computer.

Hello all The Fuel Sending Unit in a 2003 Chevy Malibu is the the Fuel tank itself! You must unbolt the fuel tank from the two straps. Be very carfull that you do this while the fuel tank is almost empty this way when you drop it it wont be too heavy. You will have to unscrew the cap where you have all the wires on the inner top of the tank. The fuel pump…

The 2012 Kia Sorento runs on regular unleaded.

The 2014 Kia Sorento runs on regular unleaded.

The 2013 Kia Sorento runs on regular unleaded.

The 2005 Kia Sorento runs on regular unleaded.

The 2009 Kia Sorento runs on regular unleaded.

The 2007 Kia Sorento runs on regular unleaded.

The 2004 Kia Sorento runs on regular unleaded.

The 2011 Kia Sorento runs on regular unleaded.

The 2015 Kia Sorento runs on regular unleaded.

The 2008 Kia Sorento runs on regular unleaded.

The 2006 Kia Sorento runs on regular unleaded.

To quote someone else, the breather pipe may be blocked. Unclog it and it should work fine.

THE FUEL FILTER IS IN THE FUEL TANK, THERE IS A ACCESS PANEL UNDER THE REAR SEAT. So I would have to remove the rear seat from the inside of my 2004 kia sorento?

Standing in front of thre Sorento, facing the engine, there is a black rubber button on the leftside at the fender at fender height, between the air cleaner and the coolant reservoir. Push it in the center. Hope this helps, you will need it if you have a minor fender bender.

The reading will vary from empty to full.

Look inside of the gas tank and it is part of the module.

in the canister by the fuel pump in the fuel tank.

Unless there is an access panel in the trunk you will have to remove the fuel tank. I would check with your Chevy dealer, as this may still be under warranty.

The fuel tank has to be removed to gain access to the fuel sending unit. The fuel sending unit and the fuel pump is replaced as a unit.

There is nothing to reset. After you replaced the fuel pump/sending unit assembly the gauge should have worked. Could be a faulty new sending unit on the new assembly. I had that happen with an aftermarket pump assembly. Bring it back and exchange it for another one.

is on the fuel pump inside of the fuel tank,,,,,,......if you lookin for the fuel temperature sending unit.

start by dropping the tank down, disconnect hoses, wires, then the reatiner ring turns off, and fuel sending unit is out, no prob

The fuel sending unit for your fuel gauge is inside the fuel tank with the electric fuel pump

No. The fuel sending unit detects the amount of fuel in the tank ... the fuel pump actually delivers the fuel to the engine.

The fuel sending unit for the fuel gauge would be located in the fuel tank.

You need to call the dealership and see if it is covered under the manufacture's extended warranty. They will repair it free of charge if so. Otherwise you will need to get a remanufactured instrument cluster. More than likely the problem is the sending unit in the fuel tank.

It's inside gas tank. Remove tank, remove sending unit from tank, swap fuel pumps, properly re-install.

The fuel sending unit for your fuel gauge is in the fuel tank with the electric fuel pump

how do you replace the fuel sending unit