I don't know how to change the ignition switch but I have some advice. Don't screw with the ignition switch, buy the whole steering column. It will be cheaper and easier to change.
You can replace the ignition lock cylinder in your 1994 Pontiac Firebird without removing the steering will. Remove the retaining ring at the top of the ignition cylinder. The ignition cylinder will slide out.
the steering wheel..
Check your Automatic Transmission fluid level
Wiggle the steering wheel back and forth and run the transmission shifter down then put it firmly back into park.
yes the engine will bolt right up.
Automatic Transmission, 4T60E,-65E Initial Fill...7.4 qtsAutomatic Transmission, Total Fill 13.0 qts
Yes you can my neighbor has one same year automatic I don't know what transmission it is though sorry. I know it had a 350 in it
4T65-E 4-speed automatic transmission
You can't it is a sealed transmission. If you have no leaks then all if fine.
I got a friend whose key can't turn the ignition on her 2000 Pontiac Grand Am. She can't get the steering wheel to unlock either.
There is no drain plug assuming it is an automatic transmission it is drained when removing the transmission pan and changing the transmission filter.
If it is on the steering column you have to remove the steering wheel, lock ring and turn signal plate to access the ignition lock bolt. There are a couple of tools needed to do this. work.
Under the dash attached to the steering column.
The most current specified and downwardly compatible automatic transmission fluid (ATF) for the 1989 Pontiac Sunbird with the 2.0L 4-cylinder engine (Vin "K") is GM Dexron VI.
If an automatic transmission ,broken bands in the tranny.
The automatic has one for the lock up torque converter
it is located on the steering column
Are your lights automatic or do you have to turn them on??? If there automatic then you need to turn the knob to the left of the steering wheel and turn it to "Off" and its the same if there not automatic too.
chevy venture vans..98 to 2000