0
Is there a way to flush out the bottom drain of an inground pool when it has no suction due presumably to leaves and debris blocking it?
Annswin
If they feel main drains are not required that brings their marketing/ sales practices into question.
Wiki User
∙ 13y ago
Add your answer:
Earn +20 pts
If you have an inground gunite pool that was drained using the pump why can't you develop suction to drain it out now that there is only a bit in the bottom?
Most electric pumps have a guard at the bottom to prevent leaves and such from getting into the pump. Unfortunately, you need to have usually about 1/2" to 1" of water in the pool for the pump to work. I would suggest trying to drain the remaining water with a hose.
What is the suction on the bottom of the rocks of the sea bottom?
Basalt, which is a mafic igneous extrusive rock.
What are the suction cup things on the bottom of starfishes legs?
They are called 'tube feet'.
Footprints on bottom of inground pool liner?
I had an inground pool installed. We just turned on the lights at night and noticed footprints on the bottom. Can this be fixed? Call the pool company back. The bottom is normally sand mixed with cement. The liner will probably have to be removed and bottom smoothed. They should have checked that before installing the liner. Those printswi catch sediment and debris for the life of the liner.
What are the bottom bit of the octupos's tentacles?
suction cups that help them grab their food.=) XD
Has anyone ever used sani-tred products in an inground pool with steel sides and vermiculite bottom?
Vermiculite is not a suitable substrate.
Do rats have suction feet?
Kind of, mice have about 5 or so suction cup like pads on the bottom of their feet, which enables them to climb easier although the sticky pads or suction cups aren't very strong,especially if they were to be holding onto something upside down.
Can you leave an inground pool swimming with concrete bottom and stainless steel sides with a hydrostatic valve empty over the winter?
Theoreticaly Yes
Adaptation of starfish?
the suction cups on the bottom of their body help them get a good grip on things.
Which shapes have 3 faces?
Triangular based pyramid with no bottom. That is, if you meant 3-D shapes, presumably?
I have two side skimmers and a bottom drain i can't seem to get the correct suction to use on my vacuum hose?
lift out the skimmer basket there should be a floating diverter with a flap that closes off suction. some skimmer baskets are rotated to do the same thing. insert your hose into the other skimmer. turn off suction to the main drain if you need more suction.
Your ingound pool has to much suction you cannot move the brush on the bottom of the pool even with the valve almost fully open?
You can get a by pass valve that will alleviate some of the suction by taking water into the hose at another point.
