If your goal is to perform a hard reset of the DS Lite's system and clear the data, then a solid method involves taking out the DS Lite's battery pack. This battery pack has to be disconnected for at least ten seconds to get the system to fully reset.
Hold down the Power Button at the back of the Mac on the side. (probably left)
To reset "Maintenance Notice" on the display, turn the ignition key to ON, with engine off. Select the "Maintenance Schedule' key by using the button to right or left. Using the button select the "Reset" key and push the "Enter" button.
To reset "Maintenance Notice" on the display, turn the ignition key to ON, with engine off. Select the "Maintenance Schedule' key by using the button to right or left. Using the button select the "Reset" key and push the "Enter" button.
There is no reset button. The alarm is disarmed by using the remote or turning the key in the door lock.
To reset "Maintenance Notice" on the display, turn the ignition key to ON, with engine off. Select the "Maintenance Schedule' key by using the button to right or left. Using the button select the "Reset" key and push the "Enter" button.
If you keep your fingers on the home button and the lock button at the same time for 10 seconds, your iPod shout reset.
No, it cannot. You could, however, trip the circuit using the TEST button before plugging or unplugging the device in question.
Turn ignition key to "ON" with engine off. Select the "Maintenance Schedule" key by using the button to right or left. Using the button select the "Reset" key and push the "Enter" button.
Press the trip reset button and keep it depressed while you turn on the ignition. After about 10 sec the oil service warning will reset and you can let go of the button It depends of what model of Polo are you using. If your using a 1995 Polo Classic depress the trip reset button then turn on and off the ignition for 3x then number 1 - 7 will appear choose a number then depress reset button again.
You can try to factory reset by first going into the fastboot screen. To do this, power down the tablet completely (long-pressing the power button should do this). Then, long-press both the power button and volume down buttons at the same time. It should take you then to the fastboot screen, which is a lying down Android icon with an open chest, up and down buttons on the side, and text. Using the volume buttons, scroll until you get to Recovery. Press the power button, and it should give you as one of the options wipe data/factory reset. Select Yes, then press the power button. If this does not work, consult your tablet's manufacturer or carrier.
There is no reset button. The computer is reset by repairing whatever tripped the CE light, and then using a scan tool to reset the light. Reset the light without repairing the problem and the light will just come back on.
Turn the tablet off. Press and hold the back and power buttons together. Press the back button again to enter Recovery Mode. Scroll down using the volume down key and select "wipe data/factory reset". Press the power button again to confirm. Now select "yes" (scroll down again using the volume down key) and press power button to confirm this. Wait the formatting to be complete, then reboot the tablet.