Yes, sort of. At least for DC, that's correct, since P = I x V (power = current x voltage). In the case of AC, the correct formula is:
P = I x V x (power factor)
In many practical situations, the power factor is close to 1, and can therefore be ignored.
The watt is a measurement of power. In electrical circuit, to determined watts there is a formula volts x amps = watts
It depends on how many Amps (current) are applied to the voltage. Watt = Volts x Amps. e.g. 12 volts @ 5 amps = 60 watts
Milli amps is a measure of current whilst watt is a measure of power. The missing element is voltage as the formula is:- Power = Voltage * Amps ie power in Watts is the product of Volts (in Volts) times Amps (in Amps)
This can be easily calculated with the following formula: Power = Volts * Amps To re-arrange to answer you question: amps = power / volts amps = 500 / 120 = 4.166 amps. Or here is an online calculator: http://www.sengpielaudio.com/calculator-ohm.htm
Amps times volts = watts Watts measures the rate of power usage. watts times hours = watt hours Watt hours is a measure of the amount of power used.
The formula is volts times amps equals watts, or watts divided by volts equals amps.
amps equals watts divided by volts.
Amps is an electric current unit and watt is an electric power unit.
Max amps would be 1000 divided by 120.
The formula to calculate the relationship between amps, volts and watts is Volts X Amps = Watts or Volts = Watts / Amps or Amps = Watts / Volts therefore; 200 Watts divided by 1.95 Amps is 102.5641 Volts.
It depends on the wattage of the unit. When that is found use the formula; Amps = Watts/Volts to find your answer.
The formula you are looking for is I = W/E. Amps = Watts/Volts.
The formula you are looking for is Amps = Watts divided by Volts. Once you find the amperage you can decide as to the size of a fuse you should use. Remember that fusing protects the conductors of the circuit and not the load of the circuit. A #14 wire is rated at 15 amps and can legally be loaded only to 12 amps.
A very basic formula is that power (watts) equals amperage times voltage. For example, if you are operating at 120 volts, 580 watts, the amperage would be 4.8 amps (580 divided by 120).
Use this formula Amps = Watts/Volts.
Multiply the volts by the amps to find the watts.
Answer You need the Voltage and the amps it can supply then use the magic triangle formula that is Watt = Amps X Volts say 400mA 12 volt that will work out to .4X12 = 4.8 watt