You have to be stopped with the transmission in neutral when you shift in or out of low 4 wheel drive. Park doesn't work as neutral. When you push the rocker switch up for high 4 wheel drive once you will be in high 4 wheel drive, push it again for high 2 wheel drive, you can shift between high 2 and 4 wheel drive while you are driving.
Why do caliper bolts back out on a Chevy K5 Blazer 4*4?
It's underneath the car, on the inside of the frame on the driver's side... about halfway back.
the back
Chevy s10 blazer lug pattern is 5x4.75 with 6" back spacing
6x9
There were no Chevy Blazers around back in 1074.
not likely!! problem is probably adjusters stuck !!on rear brakes,if the adjusters were not stuck then whenever you back up they should adjust them selves.
It is on the back of the intake manifold.
NO. In late 1999 Chevy redesigned The ENGINES and TRANSMISSIONS.You must put the new designed 4L60E back in the 01. Nothing lower then late 1999 will interchange with it.
There are two clips on the back side of each headlight that you lift vertically. Once the clips are removed the headlights come right out.
Because it hates you!
In back of engine, it can be reached from the top.