for temperary solution ,, click on folders in my computer window,, and left side u click on d drive it will open,,, after that chek any .exe, .ini, .dll file is directly copied on d drive, if copied remove the files,,, and if opssible move ur data into some other drive and format d drive,,, then defenetly opens for temperary solution ,, click on folders in my computer window,, and left side u click on d drive it will open,,, after that chek any .exe, .ini, .dll file is directly copied on d drive, if copied remove the files,,, and if opssible move ur data into some other drive and format d drive,,, then defenetly opens Aravind
------------------------------------------------------------------------------------------------------------------- Dear Arvind,
Download flash disinfector from the link. Only 129 Kb. Run the exe. Really you will have the best solution,
http://www.filetransit.com/download.php?id=67354
thanks bye
Opening a hard drive can mess it up, if you have no clue what your doing.
go to start>and right click on computer, then properties, it will tell you there on the opening window.
You will need to connect it to a computer to read what is on the external drive. As a precaution, always scan external storage devices with anti-virus programs before opening any content on a drive.
a hard drive is called "disque dur" in French.
* Hard disk drive * Hard drive * HDD
Pls. help !
If the Hard drive is IDE (40 pins on the back) you would configure the primary hard drive as Master and secondary hard drive as Slave using the jumpers on the back of the hard drive.
It is the same as a laptop hard drive
Not usually. Over time computers do slow down due to "wear and tear" on the system parts. The best way to tell if a hard drive is about to fail is if the drive starts to make strange or loud noises that were never there before.
It all depends on what the fault is. It is possible to swap the platter into an identical hard drive, or swap a faulty circuit board. Opening the sealed cover will allow dust in, unless done in a clean room. Although a repaired drive may work, it's life will be shortened by the contamination.
No. IDE Hard Drive cannot be replaced with a Sata Hard Drive because the connectors are different. example. if you have sata hard drive installed on your machine. and you purchase IDE Hard drive. you won't be able to install the IDE hard drive where the Sata hard drive was because the IDE connectors are a different shape and size towards the Sata hard drive connectors.
To start, the hard drive cable connects your hard drive to your motherboard. Its really simple.