value will depend on condition.
also is one of your barrel riffled for accurate slug?
is it still operational and accurate?
I have a Stevens 1915 410 with one barrel riffled and its in perfect working order, dead accurate, and its in the best condition I have ever seen for that time era. Mines been feeding the family for generations.
That patent date identifies a Stevens single shot.
i have a Stevens like the one you speak of.....here is what mine is stamped....hope it helps.....top, patented august 12 1913 right side of receiver trade mark Stevens reg us pat off & fgn Stevens arms company chicopee falls mass. usa left side stamped nitro special.........
The model number is stamped on the right side of the receiver on many Stevens products.
prior to 1968 the 94c was not stamped with a SN
Mine is stamped on the underside of the reciever. Take off the fore end and it should be easy to find....
This shotgun is in the neighborhood of 100 years old. There is fairly extensive information online available on this shotgun.
The "J.Stevens" name was shortened to "Stevens" in 1940. What you need to look for is the chamber size, which should be stamped on the barrel. It needs to be 2 & 3/4 inches to shoot modern ammo. Also Stevens usually stamped near the chamber size if the barrel was proof tested. My Stevens single is stamped "Proof Tested Steel" and it handles modern ammo well, but kicks like a mule. To be really safe, let a gunsmith look at it.
Do you have any more information on it? next to model # is stamped 4E The Stevens/Savage Arms 94 C was produced from 1934 until around 1983. The lack of a serial # would indicate it was before 1968, and what is the manufacturing facility?
nitro hunter shotgun single barrel with exposed hammer stamped belknap hdwre and mfg serial 5516
Not a model number. If you are finding that stamped behind the trigger guard it is an assembly number. In any event, virtually any Stevens single-shot shotgun is going to sell for less than $100. firstname.lastname@example.org
Stevens 12ga. /mod dhead naught
$14000 i think says jacko Scott $14000 i think says jacko Scott
No way to tell without more information.
The "J.Stevens" name was shortened to "Stevens" in 1940. What you need to look for is the chamber size, which should be stamped on the barrel. It needs to be 2&3/4 inches to shoot modern ammo. Also Stevens usually stamped near the chamber size if the barrel was proof tested. My Stevens single is stamped "Proof Tested Steel" and it handles modern ammo well, but kicks like a mule. To be really safe, let a gunsmith look at it. "J. Stevens" was used from 1930 to 1948. Any gun built by Savage/Stevens in that time period will have chambers 2 3/4 or longer. If it also says "& Co" or "A & T" it will be older and may not.
J Stevens company was founded in 1864 and then bought by Savage in 1920. Therefore, if the gun is not marked Savage any where, it was made any where from 1864-1920.
describe the type of shotgun and recheck the serial number
i have an old 12 gauge double from j Stevens a & t company and it is hand stamped 33 on the barrels receiver and the brace underneath barrels and we dated it back to 1880's
The Stevens will accept whatever caliber designation is stamped on the side of the barrel.
It was madein the1930s by J Stevens Arms Springfield Mass. ( Crescent was bought out by them in 1932) and the name changed to Crescent - Davis. Value can range from 100. to 500. depending on condition.
This is probably a Stevens model 520. What is your question?
Blue Book of Gun Values
They are date code stamped, see related links for information on the Remington Society of America.
The Riverside trade name was used by J. Stevens from 1915-mid 1940's. You MIGHT be able to get a precise date by contacting the Stevens historian. savagearms.com should have his contact information.