0
That should be the right side brake and signal light circuit. Start with checking the fuses. Need more info to help you.
Wiki User
∙ 14y ago
Add your answer:
Earn +20 pts
How do you convert a 4 way Uhaul Trailer wiring to a 7 way trailer wiring you have a 7 way addapter that hooks to a 4 way you just need to know where to connect the other three wires?
Don't worry about the extra wires, the trailer with a four wire plug doesn't use them. The extra wires left over are for electric trailer brakes, a 12 volt power supply from the tow vehicle and a rarely used back up light or third brake light. The trailer with a four wire plug only uses the white wire for ground, the brown wire for the running lights, the yellow wire for the left signal and brake and the green wire for the right signal and brake.
What is the wiring color code from a ford factory installed 7 way trailer connector?
For a 7-way trailer connector, the right turn signal wire is green. The left turn signal wire is yellow. The ground wire is white. The tail/marker wire is brown. The brake wire is blue. The batter wire is either red or black. The back up wire is purple.
Why does your trailer lights go out when you hit the brakes on your f 150?
You have a grounding problem at the trailer. The white wire is the ground on trailer wiring. The taillights are brown, the signals and stops are yellow and green. Sometimes the white wire will loose its continuity with the truck, causing the lights to black out. It could also be a wiring issue with the trailer itself, but most likely its the ground giving you feedback and causing the blackout. run a wire from the ground contact on your plug back to a spot on the tongue and secure the end of the wire to the trailer at that point. Do not rely on the contact of the trailer with the ball hitch to establish a ground.
What colour is the ground wire for a computer power supply?
green
How do you wire a 4 prong trailer wiring plug?
If you are referring to a 4-wire flat trailer cord then; White=Ground, Brown=Marker/Tail, Yellow=Left turn, Green=Right turn.If not, see the answer to the Related Question shown below.
What are the wire color codes for Trailer 7 blade?
There are seven color codes for a trailer 7 blade. The right turn wire is green, left turn is yellow, the ground wire is white, the tail/marker is brown, the brake is blue, the battery is red or black, and the back up is purple.
What colors for turn signal wires for Chevy s10?
If you are hooking up a trailer plug the left turn signal wire is yellow and the right turn signal wire is green.
What color is the constant power wire to radio to 1990 ford thunderbird?
The constant power wire for the radio in a 1990 Ford Thunderbird should be green/yellow. The ground wire for this vehicle's stereo system should be black/light green.
What color is the left blinker wire for a trailer plug on a 2003 ram 2500?
Left is yellow, right is green, tail lights are brown.
2002 Tahoe trailer brake and blinkers work but no running lights any suggestions or ideas would be helpful?
Take a light tester and check the pins at the truck side trailer plug. With the truck set for running lights check for power at the pins. If there is power then there is a loose or bad wire on the trailer side. If there is no power then there is a power problem on the truck side.
Why does your stop fuse blow when you tow trailers?
Because lighting up the brake lights of both the car and the trailer pulls too much power. If the problem is a specific trailer then your trailer may be mis-wired. You may also have a mis-wired trailer wire adapter.
Which wire is positive and which wire is negative on 1998 4 liter grande Cherokee ignition coil?
The dark green/orange wire is the power feed.
