I had this same problem. If the bulbs and the fuses are good its most likely the brake switch. Its a plunger like switch on the brake pedal. Its usually the only thing on the brake pedal. Its pretty easy and cheap to change. I would start there.
my lights are not working when i changed the pads on my peutgeo partner van
have you checked the bulbs and fuses
If the night running lights have failed the bulbs should be checked. Find the bulb housings and remove the parts. After the bulbs are replaced check the lights.
Have you checked the drl relay?
possible turn signal switch failure common on gm cars
If the brake lights & horn are on the same fused circuit the most likely cause of the problem is an open circuit before the fuse.
I live in the state of TN and have gotten a ticket with the box for "Missing Required Lights" checked. The officer said that one of the tail lights were out, but both of the tail lights work. Can I be convicted for this?
have you checked the reverse lights switch?
have u checked ur relays?
I tried all the fuses, the parts that under the brakes I checked that. All lights come on and working except the brake lights no break lights.
It needs checked out but both the hazard and brake lights go through the turn signal switch.
Aircraft landing lights are key to takeoff and landing, and should always be working and checked prior to takeoff. Replacement lights can be purchased from Amglo and XEVision.