all engines are different. check with the dealer. be sure to give year make model and engine size. Most caps have a number 1 on it and then you can follow the firing order on the engine block or look in the manual and see what happens. most cars are as followed V8 1234 drivers side 5678 passender side
no comment i just need the answer where is the number one spark plug on the 307 distributor cap
if its a v-8 it is 18436572 number one on the cap should be pointing at number 1 cylinder is there a picture of the cap
On most cars the firing order is stamped on the intake manifold. the only thing you will sometimes will find on the distributor cap is the number 1 showing the location of the wire that goes to the number one plug.
where is number one on a vortex 4.3 v-6 distributor cap
Number 1 plug position will be listed on the cap. Now if you know the firing order, and you know the direction the distributor is turning, you then will know plug positions as connected to the distributor cap.
The marked # 1 position on the distributor cap faces towards the REAR
A good quality cap has number 1 labeled.
Number 1 on the distributor cap is the top post closet to the firewall. Looking at the distributor cap it would be... top row 1-3 bottom 2-4
# 1 on the distributor cap faces to the FRONT / CENTER
The 1996 VW Polo distributor wire order is 1-3-4-2. The number one spot should be marked on the distributor cap.
Front righthand side of cap
They have to be in the firing order.
The marked # 1 position on the distributor cap faces to the FRONT
A 1993 Intrepid does not have a distributor cap.A 1993 Intrepid does not have a distributor cap.
I cannot answer this question.
The distributor cap order for a Chevy 283 varies depending on the year of the motor. A 1975 to 1991 has the number one cylinder at the top just to the left of center. The 1967 to 1974 distributor has the number one cylinder at the top just to the right of center. The firing order is 1, 8, 4, 3, 6, 5, 7, 2.
Firing order 1-3-4-2 Dist cap. 4-1-2-3 this awnser is unknown. WITH A DISTRIBUTOR, A 2.4L (4G64), THE FIRING ORDER IS 1-3-4-2 AND THE PLUG ORDER ON HEAD (FROM FRONT) IS 4-3-2-1. THE DISTRIBUTOR ORDER IS 2-3-4-1 AND IS COUNTERCLOCKWISE ROTATION.
The distributor cap should have the number 1 marked on it. The distributor cap is installed with the # 1 position facing the engine , slightly towards the drivers side of the engine
The marked # 1 position on the distributor cap faces towards the firewall
It depends on the firing order of the engine
It does not have a DISTRIBUTOR OR CAP
It does not have a distributor cap.
get a book Run your spark plug wire from the #1 plug to the #1 lug on the distributor cap. Then follow the rest of the firing order going clockwise around the cap.
Points, no. Distributor cap, yes.Points, no. Distributor cap, yes.