How do I replace the power window switch on 1977 Corvette coupe
Remove the inside door panel of your 1982 Chevy Corvette. Remove the window retaining clips. The window will lift out.
It is probably embedded in the rear window glass. In convertible models I believe it is inside the passenger door.
The 1992 Chevy Corvette power window fuse is located in the fuse box. The power window fuse will be in the second column, second from the top.
1963 Corvette coupe, split rear window.
I have a 1972 Corvette and the power window relay is in the shifter console, just forward of the power window switches. I would believe it's in the same place in the '73. Good Luck
There is only one fuse for all power windows. If only the passenger side window does not work, the problem is either with the passenger window switch or the motor on that window.
Of course not. When was the last time you saw a vehicle without a passenger window.
Corvette stingrays have a distinctive split in the rear window to resemble a stingray's barbed tail.
passenger window does not work getting power when i press the switch getting power on both sides of wire tested motor works
The power window travel for a 77 Corvette is adjusted by bolts that are in slotted holes. Remove the door panel. Make small adjustments to each adjustment slot until the window travels properly.
96 Trooper how do you repair the electronic window rear passenger?
Very careful pry it out with a small thin flat head screw driver, put tape on the screw driver to keep from scratching the surrounding area
Remove the rear passenger door panel. With the door panel removed the entire window mechanism will be visible. Place the new window in the window track. Secure the window with the retaining clips.
The 1978 Corvette power window diagram can be found in the cars maintenance and repair manual. A person can get these manuals at an auto part store.
1963 was the only year
The switch could be bad at the passenger seat. The switch could be bad at the passenger seat.
The rear portion may have to be modified (underneath the rear window), but it should work otherwise.
put in a new relay... if the window works it was a bad relay
How to repair power window in 2000 Ford Ranger passenger window will not work with either drivers button or passenger button the relay does not make any clicking noise either What is wrong?
Yes. But you'll need to take off the door panel to force the window up by the rail the glass is resting on. I assume you've already tested the regulator because you indicated the motor was bad. How did you test it. I'm interested.