Oil and Oil Filters
Jaguar auto
Chevy Silverado
Ford Expedition XLT

On a 1988 Jaguar XJ6 there are two oil drain plugs what size wrenches do I use. Do I have to drain both sides. Do the drain plugs unscrew counter-clockwise?

161718

Top Answer
User Avatar
Wiki User
2005-11-24 03:20:52
2005-11-24 03:20:52

I don't know off-hand the metric wrench size( most common are 15mm, 18mm,22mm). You have to drain both sides; they will unscrew counter clockwise. I hope this helps you. Mark

1
๐Ÿ™
0
๐Ÿคจ
0
๐Ÿ˜ฎ
0
๐Ÿ˜‚
0

Related Questions

User Avatar

Oil drain plug? Turn counterclockwise.Oil drain plug? Turn counterclockwise.

User Avatar

In order to flush the radiator you will need to remove the lower tray to access the hose. Unscrew the drain plug attached to the hose and let the radiator drain.

User Avatar

It is very simple to drain oil and fill it all you have to do is unscrew the bolt under the bike to drain it and unscrew the dip stick to add oil

User Avatar

There's a drain plug on the bottom passenger side of the radiator. Unscrew it and the coolant will drain.

User Avatar

If you are asking about the drain plug you turn it counterclockwise.

User Avatar

Unscrew the drain plug, or pull the bottom radiator hose off

User Avatar

Using a suitable 15mm wrench turn the drain plug counterclockwise.

User Avatar

Plug--Counterclockwise to loosenPetcock- Clockwise to open

User Avatar

Plug? turn counterclockwise Petcock? Turn clockwise

User Avatar

It seems to me I use a 15 mm wrench to remove the engine oil drain plug.

User Avatar

unscrew the drain cover and use needle nose pliers to pull hair out of the line. Have the drain line snaked.

User Avatar

There is a pitcock valve on the bottom of the radiato. On the side facing the engine. It has a T shaped handle that you can unscrew to drain the radiator, and by default the engine block. You may have to use pliers to unscrew the plug, over time dirt and corrosion can make it dificult to loosen.

User Avatar

Bottom of the engine on the oil pan.

User Avatar

The drain plug would be at the lowest point under the engine. It will take a 15mm wrench to remove it counterclockwise.

User Avatar

To change Volvo oil filled 940 engine mount, push a container under the oil drain plug. Unscrew drain unplug and remove the cap from the oil filler hole at the top of the engine. Unscrew oil filter to drain. Then change oil.


Copyright ยฉ 2020 Multiply Media, LLC. All Rights Reserved. The material on this site can not be reproduced, distributed, transmitted, cached or otherwise used, except with prior written permission of Multiply.