Mercury Topaz
Nissan Pathfinder
VW Passat
Turn Signals and Hazard Lights

On a 1989 Mercury Topaz why would the blower and turn signals stop working when all the fuses are still good Could it have something to do with the key ignition switch?

131415

Top Answer
User Avatar
Wiki User
Answered
2006-09-25 17:37:56
2006-09-25 17:37:56

turn signals work on a flasher module which is located on the front side of the fuse panel (it is usually round in shape) and are inexpensive. i am guessing the blower you mention is the fan for the a/c and heating. if so you may have a bad relay, switch selector, or fan motor itself, in order to find the problem you must have some type of electrical troubleshooting background. otherwise you local mechanic should be able to locate the problem.

001
๐Ÿ™
0
๐Ÿคจ
0
๐Ÿ˜ฎ
0
๐Ÿ˜‚
0

Related Questions


it is either you have a shor in your wiring or you have a loose connectoin or you need a new relay

If you replaced the flasher on your 1999 Mercury Cougar and your turn signals are still not working, you should check the turn signal fuse. This fuse is located under the dashboard on the driver's side of the vehicle to the left of the steering column.

A burnt out signal bulb, a faulty blinker relay, a faulty blinker switch, a loose connection or a broken wire are all things that can cause the turn signals not to operate properly.

if only the turn signals are not working,you should replace the flasher can

If your turn signal flashers stopped working, play with the emergency flasher button on top of the steering column. Our 97 Sable turn signals quit once and luckily I pushed the emergency flasher button in and out many times and the signals have worked ever since. But the emergency flashers don't work, but I can live with that.

If the turn signals in the dash don't work, what about the outside front and rear turn signals? Working? Not working? If it's not working, replace the turn signal relay under the dash.

Well, you don't state the poblem, but if all your turn signals are not working and flashing as they should, replace the Turn Signal Flasher Relay.

Mercury is highly toxic and working with it can cause mercury poisoning.

The fuel pump may stop working when you hit the ignition due to the mechanical failure.

2004 mercury grand marquis fan stop working

My turn signals are not working on my 92 buick regal.

Hand signals are to this day a legal form of traffic control devices.

If turn signals are working could be a bad bulb If turn signals are not working--could be fuse flasher or problem in steering column

Ignition is required for an engine to work. Failure of ignition would prevent the engine working.

When you first turn on the ignition the indicator lights should briefly illuminate to demonstrate that they are working. If the light stays on after the test cycle, it is an indication that something is wrong.

If the turn signals are not working properly on a 2002 Chevy Venture and the fuses seem to be alright, check for burned out bulbs in the turn signals. Also, check to make sure the turn signal flasher is working properly.

It is the nervous system working through reflex arc systems of the spinal cord.

capillarity rise.heating expands mercury whereas cooling contracts mercury

I am working on changing my 93 Explorer ignition switch now. As soon as I figure it out I will let you know. :-) Still working on it.

fuel gauge not working and power windows and radio.2004 mercury mountaineer.


Copyright ยฉ 2020 Multiply Media, LLC. All Rights Reserved. The material on this site can not be reproduced, distributed, transmitted, cached or otherwise used, except with prior written permission of Multiply.