they are Allen bolts
The calipers are threaded and screw out.
jack up the tire and then remove the bolts that is holding the calipers and then remove the hose and the calipers will come off. you will need to bleed the brakes when you replace everything back together.
The 2000 Buick LeSabre front grill is held in place with eight retaining bolts. Remove the retaining bolts and the front grill will come off.
No
You did not mention if it was the intake to the cylinder head bolts (1993 buick lesabre 96 in-lbs)..... or ..... the intake upper to lower bolts ( 1993 buick 132 in -lbs) but i hope you will know wich you are looking at since there is a large difference in torqe.
where are the two bolts located on the starter?
The starter on a 92 Buick LeSabre is replaced by disconnecting the battery, removing the retaining bolts, and lowering the starter. The wiring harness can then be disconnected and a new starter installed.
There are 2 bolts that hold it to the rear of the engine.
75 ft lbs
The 1990 uses a t50. The 89 is probably the same.
Where is the thermostat located on a 1987 Buick LeSabre?
Because its a 1988 Buick LeSabre