Quantcast
answersLogoWhite
notificationBell

Top Answer
User Avatar
Wiki User
Answered 2008-08-17 04:34:08

Tire out of balance, bent wheel, defective tire, or worn steering parts.

001
๐Ÿ™
0
๐Ÿคจ
0
๐Ÿ˜ฎ
0
๐Ÿ˜‚
0
User Avatar

Your Answer

Still Have Questions?

Related Questions

I feel shaking in my stearing wheel when i apply my brakes?

Dude your front brake disks are probably warped or cracked, you'll probably need to fully replace them


How do you change the ignition switch on an 1986 Chevy scottsdale pickup truck?

You will need certain tools to do this,Stearing wheel puller kit,and a torx bit,Pull stearing wheel first then you may have to Take all the plastic off the stearing column and there you will be able to dissasemble top part of column,at this point you should be able to see the switch retaing bolt.


Wheel and axle examples?

stearing wheel,wheel on a bike,real on a fishing rod





What causes car to shake on jeep cheerokee?

Shaking can be caused by a number of things. Is the whole car shaking or is it more in the stearing wheel or during braking. Have the tires balanced. This is inexpencive and could be the problem also have them checked for seperation. It could be a severly worn wheel bearing. If the shaking occurs more during braking it could be a warped rotor. A worn tie rod can also cause some shaking. My best advise is take it to a tire shop first to rule that out and most shops can check the tie rods, wheel bearings and also brake rotors. Hope this can help get you started.


How do you change the steering wheel on a 2001 camaro?

First pull the fuse to the air bags then remove the rubber cover on the stearing wheel. You will then see 4 to 6 bolts to remove the air bag and the air bag mounting bracket. After removing the bolts you will then need to unclip the air bag connector and then you will be able to remove the airbag. Then you will see a nut on the stearing will shaft, remove it and then you will need a wheel-puller to remove the stearing wheel due to the fact that it is pressed on. First pull the fuse to the air bags then remove the rubber cover on the stearing wheel. You will then see 4 to 6 bolts to remove the air bag and the air bag mounting bracket. After removing the bolts you will then need to unclip the air bag connector and then you will be able to remove the airbag. Then you will see a nut on the stearing will shaft, remove it and then you will need a wheel-puller to remove the stearing wheel due to the fact that it is pressed on.


Steering wheel starts shaking sometimes on Nissan sentra?

you steering wheel starts shaking because you probably have warped roders your shaking will get worse at higher speeds and when pressing the brake


How do you plug a stearing wheel into an Xbox 360?

the only xbox 360 wheel ive heard of is made by xbox and that one's wireless......


Do wheel bearings cause shaking?

Wheel bearings that are failing will usually start warning you with grinding. By the time they have failed completely, your wheel will certainly begin shaking--right before your wheel falls off.


Examples of wheel and axle?

tire ,stearing wheel ,wheel on a bike , a fishing rodA car, a train, an airplane's landing gear, a baby buggy, a ferris wheel, a bike, a unicycle.


Where is the Windsheild wiper fuse for 1999 F150 located?

Its in the fuse box under the stearing wheel.


Ford expedition noise when turning the stearing wheel?

check power steering pump or belt tension.


What is noise when you turn wheel to the right?

try filling up your power stearing fluid,that could be the problem.


How do you convert a single rear wheel truck to a dual rear wheel truck?

You can convert your single rear wheel truck to a dual rear wheel truck, by changing the rear axle and rear end gears. The conversion can be very expensive.


Will rims off of a 2 wheel drive s10 truck fit on a 4 wheel drive s10 truck?

wil rims off a 2 wheel drive s10 truck fit a 4 wheel drive s10 truck


Why is your truck shaking when you brake Its not the rotors and the brake petal and steering wheel shakes only when braking at any speed?

There could be a bad wheel bearing or worn front end components. Check the tie rod ends and ball joints for wear.



Shaking steering wheel when braking?

You have a warped brake rotor.


What does a racing car have?

seats roll cage gear stick stearing wheel wheels handbrake speedomiter fule gage


Where is the Chevrolet epica 2007 obd-II connector?

under stearing wheel. There is no need to unscrew or open anything.


What does it mean when the trac off light come on and stays on a 2000 Pontiac Grand Am?

There should be a trac off button on the stearing wheel, when it is pushed to the off position, it makes the light come on. If it is set on the stearing wheel only when there is a issue with your tires should it come on. (Like if you going over very bumpy grounds)



Why would a car go shaking?

Wheel imbalance, bad wheel bearing, bad rotor(s).


Still have questions?

Trending Questions
How old is Danielle cohn? Asked By Wiki User
Previously Viewed
Unanswered Questions
How thick is a rams skull? Asked By Wiki User
Is hugged a common noun? Asked By Wiki User
Who is juelz Santana baby mom? Asked By Wiki User