Hi my had the same problem the window went down and occasionally would go up, when the door panel came off water had corroded the door wiring harness but it was easily and cheaply repaired with a used part .
No they do not, only the driver side window, passenger side window, and sunroof are the only one that opens
I've got a better question, why is this question in the Chevy venture forum ?
if you hold the key in the lock position it will close the window also held in the open position it will open the window
The most common problem with Cabrio auto windows is the Window regulator. Each window has it's own. My wife also owns a 2002 Cabrio, that had a mis-behaving window driver window and the passenger was locked in the up position. After inspecting the drivers window, I found one of the cable roller guides was broken, causing the cable to snag when using the window open / close, and resulting in the window seeming to have a mind of it's own. I had a local garage order the regulator for me, and then I disassembled the drivers door and installed the new regulator (problem is now solved). The passenger window was bound up, I also had to remove the regulator and let loose the tension in the cable system by carefully removing the cover over the cable roller. This window works fine now as well.
needs electric motor located underneath glass, behind door panel.
I believe the relays are on the passenger side, up close to the window. Im not exactly sure but Im having the same problem and I think that's where they are. hope this helpsAnswerI believe the relays are on the passenger side, up close to the window. Im not exactly sure but Im having the same problem and I think that's where they are. hope this helps
Close the window press the button again as if to close and listen for a click window reset
press the red button at the top left corner of the window. or just press command+w and the window will close
If you want to close the current window, use window.close() or simply close() If you want to close a window that is stored in a JavaScript variable, apply the method close() to it. For example: var myWindow=window.open("http:\/\/www.example.com/"); myWindow.close();
NOTE: Anytime the battery terminal has been disconnected, please initialize the driver's door power window and front passenger's door power window after reconnecting the battery terminal. With ignition switch in the "ON" position, do the following: 1. Push down and hold the driver's door power window switch to completely open the window. 2. Pull and hold up the driver's door power window switch until the window closes. Continue holding the switch for approximately one second until the switch changes from blinking to a constant illumination. 3. Check for proper operation of the "one-touch open and close" function by fully pushing the switch briefly to the "DOWN" and "UP" positions. At this time the power window switch for the passenger's door window should be blinking. 4. Push down and hold the passenger's door power window switch to completely open the window. 5. Pull and hold up the passenger's door power window switch until the window closes. Continue holding the switch for approximately one second until the switch changes from blinking to a constant illumination. 6. Check for proper operation of the "one-touch open and close" function by fully pushing the switch briefly to the "DOWN" and "UP" positions
To close the window just press Escape on your keyboard (ESC).
Close it.