That is the charge air pipe.It has four nuts where is connects onto the exhaust manifold and also ties into the exhaust collector mounted directly below going to the exhaust system.The charge air pipe goes to the housing on the front of the air cleaner housing which has three air filters inside the housing.
exhaust manifold is where exhaust pipe hooks to engine!
The purpose of the exhaust manifold is to connect the exhaust ports on the cylinder head to the exhaust pipe.
The exhaust manifold needs to have a gasket in place to help seal the juncture between the manifold and the engine. After the gasket and gasket sealer are in place, tighten the bolts for the exhaust manifold. The exhaust pipe can then be replaced on the new exhaust manifold.
it is in the exhaust manifold,or exhaust pipe...
Exhaust leak at Exhaust manifold to head gasket or oring at exhaust manifold pipe.
You have to remove the exhaust pipe from exhaust manifold on starter side. Now you have access. Get exhaust pipe to exhaust manifold gasket first, you will probably need to replace it after taking them apart.
Intake manifold delivers the fuel air mixture to the cylinder heads, exhaust manifold collects the gases after combustion, and channels them into the exhaust pipe.
unbolt the head pipe then the manifold.
No. They are in the exhaust pipe.
In automotive engineering, an exhaust manifold collects the exhaust gases from multiple cylinders into one pipe. The word manifold comes from the Old English word manigfeald and feald and refers to the folding together of multiple inputs and outputs. Hope this helped.
The shift sensor may be found either on the exhaust manifold, where the exhaust pipe enters the engine block, or it is attached directly in the header pipe beneath the exhaust manifold.
exhaust pipe connects to the exhaust manifold, which connects to the main engine.