0
Pond is 2 meters x 1 meters x 500 deep. how much water would it hold in liters?
Wiki User
∙ 12y ago
lenght times width times height = volume so whats 2 times 1 times 500?
Wiki User
∙ 12y ago
Add your answer:
Earn +20 pts
How many liters of water in pond 6' x 4' x 2' depth?
1359.2 litres, approx.
How many gallons of water are in my pond that measures 18'x7'x 3'?
It's unlikely that your pond has vertical sides and is 3' deep everywhere, but if it were, it would hold 18 * 7 * 3 = 378 cu. ft. of water. Converting the dimensions to metric at the start makes everything easier. 378 * (12^3) * (2.54^3) give you the number of cc's, dividing that by 1000 gives you the number of liters (10703). Dividing THAT by 3.7854 (liters/gallon) gives you about 2828 gallons. A typical pond, however, probably slopes from very shallow at the periphery to maximum depth near the center. This means it likely holds 30 - 40% less than if it had steep vertical sides and a consistent depth (like a typical above-ground pool). Your pond is probably on the order of 1500 - 1900 gallons.
What metric unit can you use for amount of water in a pond?
Litres.
If A water lily is growing in a circular pond doubles in size every day it takes 30 days to cover the whole pond how long does it take to cover half a pond?
29 days... with exponential growth and reaching 100% of pond coverage in 30 days, it will be 50% (or 1/2) of its size on the 29th day...and one day later - double in size to reach full pond cover. BF Trinidad
How much fencing would you need to enclose a circular pond with diameter of 12.5 feet?
i need help
How many liters of water in a pond measuring 2.1cubic meters?
We have no way of knowing how much water is in any particular volume of space.But 2.1 cubic meters = 2,100 liters .
How much water does a pond hold that is 9 acres and 4 feet deep?
9 Acres = 36,421.7 square meters. 4 feet = 1.2 meters. Area x length = volume; 36,421.7 x 1.2 = 43,706 cubic meters. Cubic meters is a volume, which can be converted to liters, 1 cubic meter is 1000 liters. So your pond has 43,706,000 Liters. 1 gallon is 3.78 liters, so divide by 3.78 and your pond has 11,545,903.7 Gallons.
Would you measure a fish pond in liters or kiloliters?
You don't really need to measure the water in a birdbath, just put some in a couple inches deep.
How many cubic meters in a pond is needed for 65000 thousand liters of water?
65 as a cubic metre is 1000 litres
How many liters of water go in a pond 5 meters by 3 meters?
More information is required to answer this question. A litre is a volume measure (3 dimensions) but information for the pond is given for only two dimensions.
How many liters of water are in a pond 2 meters by 3 meters which 1 meter at the deep?
1 cu m = 1000 liters → volume = 2 m x 3 m x 1 m = 6 cu m = 6 x 1000 liters = 6,000 liters.
Which is the best unit to use when measuring the amount of water in a pond liters or kiloliters?
liters
What unit is used to find the volume of water in the pond?
Liters. Or MegaLiters (x1 000 liters)
How much water would be needed to fill a pond of 36 cubic meters?
9,510.19 Gallons
If a pond was 0.03 meters thick if the ice were 10 times as thick how many meters thick would it be?
It would be 0.3 metres.
What is the purpose of using a pond pump in an outdoor pond?
A pond pump helps circulate the water properly. If it is not used, the water would sit still and get slimy. If there are fish in the pond it would help keep the water clean.
How many liters of water in pond 6' x 4' x 2' depth?
1359.2 litres, approx.
