0
Putting in new hardwood flooring what is the proper procedure for using an electric jam saw?
Wiki User
∙ 16y ago
First, remove the door from the jamb. Then, with your jamb saw handy, take a piece of scrap of the floor you intend to install (use a scrap piece because the blade of the saw may scratch the piece while your adjusting your height) and put the scrap piece against the door jamg. Take your jamb saw, and adjust your height according to the pice of the scrap. It depnds on what type of jamb say your using. With the kind that looks like a circular saw with the blade mounted horizontally, and the motor on top of the blade, you can make your adjustment and remove the scrap piece and make your cut. The blades on this type of jamb saw tend to be much thicker, so when you adjust your height, take that into consideration, as well as the installation method you plan to use (glue down, nail down, or floating) because each method has a different height depending on what's beneath the wood. So, take into consideration what's under the wood (glued with a 5/32 inch trowel or nailed with nothing underneath it, floated with a 6 mil polyethelene and a foam pad? Is it being installed over concrete that has been sealed first with a good polyurethane sealer like Bostik's MVP with a 5/32" trowel - then to be glued with another 5/32" trowel = 5/16"). If you're using the kind of jamb saw that looks like it was converted from a 4" grinder, or like the Bosch that reciprocates, you'll need to keep the scrap piece against the jamb so you get a straight cut. Remember to take into consideration what's underneath your wood, and the thickness of the blade so you don't have too much of a gap between the bottom of the cut jamb and the top of the wood. Be sure to not make it too tight though, or you'll have a real tough time installing it and it won't have enough room to "breathe"...wood expands and contracts so be sure to leave between 1/8" to 1/2" expansion gap all around your room, including under the door jamb. You only have to go deep enough to not see any cuts or ends of the wood flooring underneath the door casing (molding). Also, check the power of your motor, because if you have a smaller motor, and you keep trying to cut too deep (into the 2x4 framing), you'll burn out your motor in no time.
Wiki User
∙ 16y ago
Add your answer:
Earn +20 pts
Where can I find information on putting oak hardwood flooring in?
You can find information on putting oak hardwood flooring at a hardware store, or from your friends. People at a hardware store generally can help out better though.
Does mannington flooring provide ground tiles?
Mannington provides several types of flooring from laminate, hardwood, porcelain and more. You will want to choose what type is best for you and the location you will be putting it in.
Where would I find online wholesale outlets for residential flooring?
When we were putting in flooring for our house, my father bought flooring from CostCo, and it's not very expensive, but it has good quality. You could also check flooring company's and shops.
How should one prepare a floor before putting down new vinyl flooring?
It depends on the type of floor that you are putting down the vinyl flooring on top of. If it is concrete, then make sure it is clean, dry and repair any cracks or holes. If the old vinyl flooring is in good repair then just put the new vinyl flooring over it or use an embossing leveler for slightly worn vinyl flooring. If the old vinyl flooring is in very poor shape remove it completely. Plywood underlayment can be used for other types of flooring that you will put new vinyl flooring down on top of.
Are hardwood floors non-porous?
No but you can make them non-porous by putting a satin acrylic finish on them.
Are hardwood floors non porous?
No but you can make them non-porous by putting a satin acrylic finish on them.
What is the best product to use for adhisive when putting in laminate tile flooring?
ROBERTS 1407 Acrylic Urethane Latex Engineered Laminate and Parquet Flooring Adhesive is the best. It has low odor and is environmentally safe.
What is an example of procedure in science?
like someone putting somthing in order
What is procedure for putting pics on Facebook - Do you have to have the subject's permission if the pictures were taken by you?
if you are putting pics on facebook you have to ask anyone in that photo if it is all right to do so
How To Convert Your Carpets To Hardwood Flooring?
If you are interested in making the change from carpets or linoleum to hardwood floors, you should know that often it is an easier process than many are led to believe. Many people will tell you that it is a terribly hard transition that often leaves most or all of the house virtually uninhabitable for a significant period of time. However, many new products make it possible for you to go on living despite the fact that you are either putting in or restoring hardwood floors. Plus, after the fact you will be able to step back and really love the flooring in your home. Many people prefer hardwood floors to any other kind because it is so much easier to take care of. With carpeting, often within the first couple of weeks you will already have your first stain and it will only get worse from there. Are carpets really something worth fretting and worrying about all the time? Most people would say not because you end up having to replace them in such a short period of time anyways. Therefore all that stress and time spent trying to keep them clean is wasted mostly wasted energy. It’s a floor and of course it’s going to get dirty sooner or later so why fight it. As opposed to carpets, hardwood flooring is very simply to clean. Often all it takes is a sweep and a quick rub with a wet cloth and your done. The floor always looks great and will go with virtually any kind of decor you can imagine from antiques to modern design. Add a carpet here or there and you will be ready to go. Your house will never look better. When you decide to make this transition, you might also find that perhaps underneath your carpets there is already hardwood flooring. That will make your job easier because if you don’t have to put it in, you simply have to restore what you already have. People who install hardwood floors in their homes tend to be happier overall with the look and design of their space. Perhaps you should give hardwood floors a chance in your home.
The Benefits Of Choosing Laminate Flooring?
When people think of changing the floors in their home, they often dream of putting in hardwood. This material has become the height of style in the home, though it does have some drawbacks. For people who love the look of hardwood, thankfully, laminate flooring offers the appearance of hardwood without many of its problems. Laminate flooring is typically constructed from several layers of material bonded together under high pressure. One of these layers is a high resolution image of actual wood. This gives the appearance of a hardwood floor, along with the same smooth surface that can be cleaned much more easily and thoroughly than carpet. As a result of the way its construction, it is highly durable. It is also much more environmentally friendly, because it uses less wood and the wood it does contain is used more efficiently. The most significant benefit of a laminate floor is its ease of installation. Wood is very sensitive to water and the surrounding humidity. It can easily be ruined by excessive moisture, such as during a flood. Due to this, it cannot be installed below grade. In contrast, he construction of a laminate floor makes it suitable for installation anywhere, including over virtually any other flooring surface. This allows it to be installed in a basement or over another floor. You can often install a laminate floor over another material without doing any damage to the original floor. This allows you to keep the option of later pulling the laminate floor up and going back to the original flooring if you wish. A laminate floor is also much more economical than choosing hardwood. The reduced amount of wood used to make it decreases the price significantly compared to solid wood. It’s also designed to be easily installed, and can often be snapped together with little or no equipment. This means that it can be put in by nearly anyone, rather than requiring an expensive specialist. For homeowners who love the look of hardwood, laminate flooring offers the same appearance without the expense or the concerns that it might be damaged by water. It’s also much more economical and flexible in where it can be installed. In short, it offers an ideal blend of features for people who want the style of hardwood but don’t want to deal with its expense or care.
What is with putting thumbtacks on the electric chair?
Because it's funny even during an execution
