Computer Hardware
Computer Networking

RJ-45 connectores are used with?


Top Answer
User Avatar
Wiki User
2010-10-08 05:59:23
2010-10-08 05:59:23

Ethernet cable being shielded or unshielded twisted pair or CAT 5.

User Avatar

Related Questions

An RJ11 connector is used for telephones, and an RJ45 connector is used for computer networks, and VoIP telephones. An RJ11 connector only has 2 pins, and an RJ45 connector has 8 pins.

An RJ45 connector is used for connecting an Ethernet network. The cable has eight pins connected to the wires and it goes into the back of the router or modem.

RJ45 Telecommunications - a connector standard for telephone cables, RJ45 cables are also used as a connector for a computer network by way of connecting to the internet.

RJ45 connectors are used in the telecommunications business. The purpose of these connectors is to connect cable, such as CAT5, to a jack located in a wall or device.

01. RJ45 is the connector designed for connecting Cat5/Cat6 cables. It is not used for connecting fiber optic cables.

A rollover cable is typically used to connect from a DB9 serial port on your computer to the RJ45 console port on the router. An RJ45-RJ45 rollover can be used from Aux port to Console port or from the ports on a 2509-RJ/2511-RJ to a console port.

an eight wire connector used commonly computers

It's an Ethernet port used for network connections.

8, there are 4 twisted pairs

An RJ45 spliter is used to connect two 10/100 Ethernet signals through a single Cat5 cable. Note that it does not allow to computers to share one network line.

An RJ45 cable is also known as an Ethernet cable

An ethernet cable. RJ45 is the style of the connector.

The type of connector is used by the analog modems is RJ11 or RJ45.

the popular connector used in lan network is RJ45

An RJ45 connector has 8 conductors. it has the naming convention of 8P8C (8positions 8conductors).

The 45 indicates the jack number; RJ45 indicates Registered Jack number 45. However, there is a slight complication - what most people call RJ45 should actually be 8P8C. The RJ numbers used to be allocated by the FCC, but they are now defined by Administrative Council for Terminal Attachment (ACTA).

A male RJ45 plug is specifically designed to fit an RJ45 socket. You would need a device that takes both allows you to plug both coax and an RJ45 connector into it. Perhaps a cable modem? Kind regards, Gareth

A punch down tool for jacks, a crimp tool for plugs.

RJ11 and RJ45 are the names for the terminators at the ends of the cables. RJ11 is the 2 pair (4 wire) terminator used for telephones. RJ45 is the 4 pair (8 wire) terminator used for ethernet cable.

Both RJ11 and RJ45 are registered jacks. However, there are only four wires inside of an RJ11 and eight inside of an RJ45. Fundamentally, they can be universally exchanged, however.

It doesn't have standard color, even if it does manufactories don't use it. Usually it's really hard to put something it RJ45 port, unless it's a RJ45 connector.

Yes, Roll Cable can connect to RJ45 Connector

RJ45 is an EIA standard for an 8 pin interface used in communication. It is most commonly used for high speed data on telephone lines or for ethernet. The standard describes the physical size and makeup of the connectors, male and female, as well as the electrical characteristics.

Copyright ยฉ 2020 Multiply Media, LLC. All Rights Reserved. The material on this site can not be reproduced, distributed, transmitted, cached or otherwise used, except with prior written permission of Multiply.