Start replacing the 2000 s10 alternator by disconnecting the battery. Remove the air inlet hose, and the serpentine belt. Take off the bracket over the alternator if it has one. Unbolt the alternator and disconnect the wires. Reverse the procedure to install the new alternator.
With the car or truck running disconnect only the positive side of the battery ... if it stays running that means the alternator is good if it dies then it needs replacing
If the alternator is bolted on too tight on its bracket,then it will cause the alternator to have a "bend" so that the clearance between the moving parts is reduced and the moving parts eventually jammed.
Disconnect the battery. Remove the air inlet tube. On some s10s, there is a bracket above the alternator that needs to be removed. Take off the serpentine belt. Remove the alternator wiring, then the bolts. Remove the alternator and install the new one.
how do you install alternator on 2000 Ford diesel truck
Remove the belt from your 2001 Chevy S 10 pickup truck alternator. Remove the wiring harness from the back of the alternator. Remove the alternator retaining bolts. Reverse the process to install your new alternator.
Just paid ~500 for labor + ~460 for new alternator... when i started my RRover(bigBody not sport)....it was making this mid-pitched woo sound(that followed the revving of the engine)...they said it was the alternator "bearing"...but the entire alternator needed replacing...love my truck, but she's high maintenance...LOL
How do you install an alternator belt on a 1986 GMC s15 pickup truck
Start the truck then disconnect the battery if it's still running the alternator is good
need diagram for 1986 Nissan truck alternator
It is built into the alternator It is all 1 unit. Replace alternator.
There are two bolts on the bottom of the alternator that you can't see but you can feel them, these are the pivot bolts, remove them. Then remove the adjustment bolt on top of the alternator. Remove wiring from back of alternator. Reverse instructions for install.
Bad bearings in the alternator. Best to just go ahead and replace it.