0
The Time-Taken the sample Or elute in the column is called the retention time in hplc.
Wiki User
∙ 14y ago
Add your answer:
Earn +20 pts
What is the effect of flow rate on retention time in HPLC?
When you increase the flowrate of the carrier gas, the retention times decrease. Just like when you increase the temperature of the column. Both of these conditions are sometimes necessary for substances that would otherwise have very long retention times.
Why the retention time will decrease if the polarity of mobile phase increase in normal phase HPLC?
because in normal phase HPLC mobile phase is non polar and stationary phase is polar. Most of the compound of interest are polar, if you increase the polarity of mobile phase compound of analyte will stay in mobile phase and will elute faster and retention time will be shorter.
How to calculate Relative retention time?
Divide the retention time of the peak of ineterest (ex. 14.8 min.) by the retention time of the main peak (ex. 15.9 min.) 14.8/15.9 = 0.93 Therefore your RRT is 0.93 Remember, any peak with an RRT <1 elutes before the main peak, and any peak with an RRT >1 elutes after the main peak! What is RRT & RRF in hplc
What is Cut time in HPLC or GC?
10 - 15 minutes
Why volatile compounds are analysed in gc but not in hplc?
GC can give very resolved sharp peaks with short run time compared to hplc. additionally, there is less compatibility issue in setting an MS up to a GC than HPLC
Retention time calculation for hplc?
why RT was shifting & how to RT calculation in HPLC
How can you determine retention time of a compound?
HPLC
What is RRT and RRF in hplc?
In HPLC RRT means Relative Retention Time and RRF is Relative Response Factor
What is the retention time of benzene while running through HPLC?
.73
What is the effect of flow rate on retention time in HPLC?
When you increase the flowrate of the carrier gas, the retention times decrease. Just like when you increase the temperature of the column. Both of these conditions are sometimes necessary for substances that would otherwise have very long retention times.
How buffer concentration effects on retention time in hplc method?
concentration of buffer effects in buffer strength
Why the retention time will decrease if the polarity of mobile phase increase in normal phase HPLC?
because in normal phase HPLC mobile phase is non polar and stationary phase is polar. Most of the compound of interest are polar, if you increase the polarity of mobile phase compound of analyte will stay in mobile phase and will elute faster and retention time will be shorter.
What is dead volume HPLC?
The dead volume in HPLC is 137.45. The dead volume in science is used in retention measurements and also in thermodynamic studies and the abbreviation HPLC stands for High Pressure Liquid Chromatography.
How to calculate Relative retention time?
Divide the retention time of the peak of ineterest (ex. 14.8 min.) by the retention time of the main peak (ex. 15.9 min.) 14.8/15.9 = 0.93 Therefore your RRT is 0.93 Remember, any peak with an RRT <1 elutes before the main peak, and any peak with an RRT >1 elutes after the main peak! What is RRT & RRF in hplc
What is dead volum in hplc?
The dead volume in HPLC is 137.45. The dead volume in science is used in retention measurements and also in thermodynamic studies and the abbreviation HPLC stands for High Pressure Liquid Chromatography.
What is the difference between relative retention time and retention time?
the difference between retention time and retention factor is that the retention time is a quatitative value where`s the retention factor is a qualitative on.
What will be the effect of pH on retention time?
Retention time decrease with an increase in pH.
