1.don`t throw anything in the laboratory.
2.listen to your teacher so you will know what to do so no mistake`s.
3.use your common sense.
4.hold the tools properly so you will not slide in your hands.
5.always be properly in the laboratory tools.
Pay attention to what you are doing and what you are working with.
Always wear safety glasses or goggles when working with dangerous chemicals.
Know where the laboratory safety equipment is located.
Tell the instructor of any accidents immediately.
Keep food and drinks out of the laboratory work area.
When dealing with chemicals, always read labels carefully to be absolutely certain you have the right chemical.
Sometimes you will be told to use a certain concentration of a solution. In those cases, be sure you check the label for concentration as well as the name of the chemical.
Never mix chemicals that you haven't been told to mix without an OK from the instructor.
If you spill a chemical, wipe it up immediately and advise the instructor.
If you get any chemical on you, rinse it off immediately with lots of water and let the instructor know what you spilled--on your way to rinsing it off.
wear safty glasses
wear gloves
and lab coat also
dont create distrubence
dont be over smart
Safety precautions for use in a laboratory depend on the kind of laboratory, experience of the lab workers, and type of tests being performed.
Computer Voltage Regulator
Yes? It's a good thing. Use common sense.
exploring
expeck
there are 4 safety rules in laboratory there are 1.work safety practices 2.vertical autoclaves 3.chemical identification 4.green lab equipment
ramkalwan
You need protection goggles, gloves and a laboratory coat.
Always follow your teacher's instructions and the textbook directions exactly.
When conducting an experiment in a laboratory environment, the person conducting the experiment and the Instructor or Principle Investigator are responsible for ensuring that appropriate safety procedures are followed.
The Dept. of Labor's Occupation Safety & Health Administration (OSHA) is responsible for laboratory workplace safety in those states with direct federal authority for occupational safety and health, and in those laboratory containing institutions not subject to Department of Energy safety authority.
The safety symbols used in a laboratory would depend on what kind of lab it is and what activities are pursued in the lab. There is no universal set of safety symbols suitable for all laboratories.
in a laboratory
safety rules
If you don't observe the safety rules in a laboratory, you or someone else may be injured, made sick, or killed.
there are 4 safety rules in laboratory there are 1.work safety practices 2.vertical autoclaves 3.chemical identification 4.green lab equipment
its true!
animal safety. sharp objects safety. chemical safety. fire safety. poison safety. eye safety.
You follow them when you are in the laboratory.
Laboratory safety signs are used for the same purpose as all other signs. They are used to provide information, cautions, warnings and reminders.
To prevent mishaps.
yes