The transfer case control module has detected a fault and set a code. Have it checked for codes.
in the instrument cluster
If you do the service tire system light will always be on.
1. Injectors need a service ?
To reset the service light on a 2008 Dodge Nitro, turn the ignition key to the "On" position without starting the engine. Press the gas pedal three times within 10 seconds. Turn the ignition off, then start the engine to ensure the service light has been reset. If the light remains on, you may need to check for any existing issues or repeat the process.
It means your screwed. Got a 2007 myself and can not figure it out.
Very carefully. The hardest part is pulling the light out to get to the bulbs. If I can do it anyone can do it. floppysgirl
the cause of the code will need to be fixed, then the light can only be shut off with a scan tool.
You should bring it in for service to a trained mechanic. The airbag light comes on when the computer has detected a malfunction.
The light will reset itself if the system is working properly and the tires are at the correct pressure. If the pressure is correct and the light is still on, you need to take it in for service.
it should be a yellow light in the instrument cluster, it should illuminate when the engine is first started, along with other light, while the vehicle is performing a self test,
The airbag computer has detected a malfunction. Take it in for service with a trained mechanic.
It looks like a little yellow engine. See link below.