answersLogoWhite

0


Best Answer

you dont need to remove the fan shroud. disconect your battery, drain the cooling system ther is a plug on the bottom left or right side of the rad depending on the engine open it with a large pan underneath then open the rad cap on top of the rad. then remove the upper rad hose from the thermostat housing unbolt the housing and remove it remember its position remove the thermostat stuff a rag in the opening remove the old gasket and sealant using a gasket scraper and acetone preform this operation in reverse

User Avatar

Wiki User

โˆ™ 2009-11-28 05:14:38
This answer is:
๐Ÿ™
0
๐Ÿคจ
0
๐Ÿ˜ฎ
0
User Avatar

Add your answer:

Earn +20 pts
Q: Should you have to remove the fan housing on your 1998 Jeep Grand Cherokee when trying to replace the thermostat or is there an easier way?
Write your answer...
Submit
Related questions

1996 BMW 328i Should you replace the thermostat housing when you replace the thermostat or just the existing housing gasket?

Unless the housing is damaged, there is no reason to replace it. Just replace the gasket.


How do you replace the thermostat on a 4 cylinder 1996 ford ranger?

follow the top radiator hose to locate the thermostat housing, remove the hose from the housing then unbolt the housing. remove and replace the thermostat and rebolt the housing to the motor, replace the hose The housing is made of cheap metal and should be replaced. It is important to "seat" the thermostat properly. Also, it is much easier to replace and remove the thermostat housing if you first remove the timing belt housing.


Where is the thermostat located and how do you replace it on a 2001 Grand Prix GT 3800 Series?

can you show me governor for grand prix and how can i take it of. thermostat should be located on the left side of the motor inside thermostat housing housing needs to be remove to replace thermostat


How do you replace the thermostat located on a Oldsmobile Ninety-Eight?

Follow the top radiator hose over to the engine and where it connects to the thermostat housing. There should be two bolts holding the housing to the motor. Remove the housing and replace the thermostat and gasket. The larger side of the thermo goes in the engine.


How do you replace a temperature sensor on a 2003 Saturn Vue?

If you do not know how to replace it, then you should not try to replace it. If you want to know WHERE it is, then look near the thermostat housing.


Where is the thermostat located on a 1995 cavalier 2.3 liter?

Follow upper radiator hose to housing at engine - thermostat should be in this housing Follow upper radiator hose to housing at engine - thermostat should be in this housing


Do you need a thermostat gasket or just a housing ring when changing thermostat for 91 acura legend?

You should use a thermostat gasket along with the thermostat housing ring. The gasket should be replaced every time the thermostat housing is opened.


How to change thermostat on 2000 Honda Civic?

First locate the lower radiator hose, that hose should lead you to the thermostat housing (just behind the motor and to the left). This hose should be the same size as the top radiator hose. Second you move the clamp (pliers will work) down the hose away from the thermostat housing, then loosen that hose from the thermostat housing. Third you take of the 2 Bolts off from the thermostat housing, they should be 10mm. Remove the thermostat. When you replace the thermostat you may also need to replace the gasket. Simply put the bolts back in and tighten them, then reattach the lower radiator hose and move the clamp back to its original position. Note: The top radiator hose does NOT lead you to the thermostat housing!


How much should it cost to replace a cracked thermostat housing on a Toyota freelander?

4 to 6 hundred dollars


Where is the thermostat on a 95 jeep Cherokee 4L Country?

It's located in the housing directly in the front center of the engine toward the top. Should have two hoses and a sensor coming out of the housing.


How do you replace thermostat on 2003 tc 3.8?

Should be located in a removable housing at the engine end of the upper radiator hose Drain about 1 gallon of coolant from the radiator Remove this housing Note how thermostat is installed Clean both surfaces Replace thermostat and gasket Replace housing Start engine and look for leaks Run engine to normal operating temperature with heater on Re-check coolant level


How do you replace a thermostate in a 1999 Jeep Grand Cherokee?

Should be located in a removable housing at the engine end of the upper radiator hose. Drain about 1 gallon of coolant from the radiator Remove this housing Note how thermostat is installed Clean both surfaces Replace thermostat and housing Re-fill coolant slowly to prevent an airlock Start engine and look for leaks Run engine to normal operating temperature with heater Re-check coolant level


How do you change the thermostat on a 1995 Pontiac Firebird?

take apart the thermostat housing and pop it out be sure and replace the gasket too. There should be two bolts holding it together.


How do you replace the thermostat located on a Jeep Wrangler 4 cylinder?

First you have to take off the fan shroud and fan. From there you will see where the upper radiator hose connects to the thermostat housing. It should be held in by 2 bolts just take those out and the housing will come with it. Underneath that housing is your thermostat. That's how it is on a 98 jeep unless yours is after 2002 it should be the same


How do you change the thermostat on a 1979 buick regal 38lL v6 and where is it located?

It is located under the thermostat housing. Follow the upper radiator hose to the engine. This is the thermostat housing. Remove the 2 bolts and pull housing off motor (motor should be cold when doing this). clean off gasket surfaces & replace thermostat. Bolt housing back on, open radiator, top off with coolant.


Where is the jiggle valve on a Jeep Cherokee?

The jiggle valve's a small hole on the thermostat itself (not a separate part). It's merely there to help free the system of trapped air. Follow the hose from the top of the radiator to the motor and you should find the thermostat housing. Removing the housing will reveal the thermostat and at the top of the Tstat should be a small hole -- that would be the jiggle valve (if your thermostat actually has one).


How do you replace a thermostat on a 1988 Pontiac Bonneville?

The thermostat is on the top of the motor where the top radiator hose attaches to it. The housing for it should be held on with two bolts. Remove the bolts and lift up the cover. There's the thermostat.


Where is the thermostat 1993 Chevy Caprice?

follow the top radiator hose and it should lead u right to the thermostat housing. remove the housing and the thermostat is inside


Replace the thermostat on a 99 Malibu?

Should be located in a fremovable housing at the engine end of the upper radiator hose Drain about 1 gallon of coolant from the radiator Remove this housing Note how thermostat is installed Clean both surfaces Replace thermostat and gasket Replace housing Re-fill coolant slowly to prevent an airlock Start engine and look for leaks Run engine to normal operating temperature with heater on Re-check coolant level Should be located in a removable housing at the engine end of the upper radiator hose Drain about 1 gallon of coolant from the radiator Remove this housing Note how thermostat is installed Clean both surfaces Replace thermostat and gasket Replace housing Re-fill coolant slowly to prevent an air lock Start engine and look for leaks Run engine to normal operating temperature with heater on Re-check coolant level


How do you replace the thermostat on a 1996 Dodge Ram 3500?

Should be located in a removable housing at the engine end of the upper radiator hose Drain about 1 gallon of coolant from the radiator Remove this housing Note how thermostat is installed in housing Clean both surfaces Replace thermostat and gasket Replace housing Re-fill coolant slowly to prevent an air lock Start engine and look for leaks Run engine to normal operating temperature with heater on Re-check coolant level


Where is the thermostat located on a 1991 Pontiac 6000LE?

Look where the upper radiator hose connects to the engine and you should find the thermostat housing.Look where the upper radiator hose connects to the engine and you should find the thermostat housing.


How do you change thermostat in 96 Honda civic?

First locate the top radiator hose,that hose should lead you to the thermostat housing. Second you loosen that hose from the thermostat housing. Third you take of the 2 Bolts off from the thermostat housing, they should be a 13mm or 1/2 inch socket or wrench and when it's off you should see the thermostat.


How do you replace the thermostat located on a 1995 Buick Skylark V6?

Follow the upper radiator hose from the radiator back to the engine. The part the hose attaches to on the engine is the thermostat housing. Drain a gallon of coolant or so and pop the hose off of the housing. The housing should be held on by two bolts. Remove any wires attached to sensors in the housing then the bolts. When the housing comes off the thermostat will be directly underneath. Always replace the thermostat gasket if there is one. If the hose is held on by the factory clamp I always replace them with a stainless steel worm clamp because they are so much easier to use. JPS.


Where is the thermostat located on a 2003 Durango and how do you replace it?

If it has the 5.9 just follow the hose coming from the top of radiator. That hose should run to the top of your engine. At he end of this hose there should be 2 bolts. This is you thermostat housing. Just remove the bolts and hose and replace with new thermostat and gasket. Tighten bolts and clamp.


How do you replace the thermostat of an 1999 Pontiac grand am?

Drain all the coolant from the radiator. Disconnect the upper radiator hose from the engine. Remove the aluminum thermostat housing. Should be held in place with 2 bolts. There you will find the thermostat.