It is not necessary, there is no power consumption when the dryer in not operating.
Simply Put, yes it does.
electric iron , electric toaster, electric water heater, electric geyser
If your house has 220vac each leg should have at least 110vac so if you use an electric dryer you would have 110 vac to each leg to run the dryer for outlets and switches it would be the same 110vac volts alternating current to operate electrial devices and to turn the lights on and off.
If you are referring to a cloths dryer, the answer depends on the requirements of the dryer. Most dryers require AWG#10 wire with a 30 amp fuse. If the wiring is AWG#12 then use a 20 amp breaker but never use it on AWG#10 which requires a 30 amp breaker. If you are referring to a hair dryer then yes a 20 amp breaker is fine.
Check with the manufacturer but I would guess they're not suitable for outdoors.
You wouldn't need to change the fuse while you use the saw. The fuse is there to protect the house wiring. The saw should have it's own internal protection.
Simply Put, yes it does.
Unplug the temperature sensor and the fan should start up. Other than that unplug the harness and use two jumper wires to the battery to see if it works
yes , its advisable to unplug a tanning bed when not in use.
It is not necessary, there is no power consumption when the dryer is not in operation.
The only practical way to do that would be to sell the electric clothes dryer and use the proceeds toward purchase of a gas dryer. Even if it was possible to convert the dryer the cost would be prohibitive versus a new dryer. If you mean converting the building, then you would need to have natural gas plumbing installed, and you would need an outlet that matches the voltage of the new dryer.
electric iron , electric toaster, electric water heater, electric geyser
If your house has 220vac each leg should have at least 110vac so if you use an electric dryer you would have 110 vac to each leg to run the dryer for outlets and switches it would be the same 110vac volts alternating current to operate electrial devices and to turn the lights on and off.
well you first have to unplug your lamp, and then plug in a washer/dryer. after washer/dryer has been running for about 3 mins and 5 and half seconds. you then jump up and down for 30 secs and run out of your house. by the time you get back in the afterburner should be working. thanks.
Green living is simply doing things to save our environment and earth. It not only saves our planet, but it saves the money coming out of our pockets. Turn off the lights when you leave a room. Unplug household electric devices when not in use (washer, dryer, toaster, hair dryer) For more tips on how to live a greener life go to http://geothermalexpert.net/index.html
Dryer exhaust can be to hot for a plastic type air conditioning duct. You should always use piping that is approved by the manufacturer of the dryer.
It can be from 2500 watts to 400 watts depends on what tumble dryer you buy to get a clearer view look on wikipedia or ask.com