Sony uses a sequence of flashing lights to indicate service codes. It is similar to Morse Code, ie 3 short 1 long. You will need to look up your exact model Trinitron and see what the service code means.
Standby.
Standbys and understudys perform when the actor or actress they are understudying are unable to perform which can be because of sickness, vacation, etc.
Phantom loading is the power supply being used in your home that you do not think about or realize. This power consumption is the result of items in the home that are kept on standby.
Because if the person playing the role gets sick or cannot perform then they need someone to stand in who knows all the lines and what to do, so then the play isn't a failure.
During a performance, the Deputy Stage Manager (DSM) will sit at the prompt desk (or if the venue does not have a prompt desk, will sit in the control room) and call the show using the prompt book.Generally, the DSM will use cans and cue lights which they will use to give stand-bys to the technical operator or cast member followed by a "Go".The majority of shows will have lighting (LX) and sound (SND) cues. Depending on the requirements and size of the show the DSM may also have to cue actors, musical directors, flying cues, follow spot cues, AV and many other things.The DSM will stand-by a cue several lines before it is due to happen and a response should be give by the operator/cast member/etc.On cans an example of this would be:DSM: "Standby please LX Cue 36."LX Operator: "LX Standing By."DSM: "LX Cue 36 Go."When using cue lights, the DSM will press the standby button, and a red light will appear, the LX operator would then press their button and the light would turn orange to show they have acknowledged the standby. The DSM when then say go by pressing another button, turning the light green.The DSM will also take notes on any mistakes or differences that occur during the show along with the run times and will then produce a show report.
To set the date, the receiver must be in the "Standby" mode. Sources -> Standby Then the date menu item will appear in the setup menu.
Always turn it off, althought computers have standby and hibernate modes, they're not designed to be run constantly, even in a low power mode, severs and the like are the only computers that should be left on all the time.
standby
StandBy Records was created in 2007.
Standby phase is in a yugioh duel after draw phase,you could use card effect at standby phase.
The plural form of the noun 'standby' is standbys.
Leaving devices on "standby" means they constantly use a small amount of electrical power. This amount is much smaller than when the device is actually doing something useful. The purpose of "standby" is to have the device available almost immediately, if so required.The problem is that if the device remains in standby for a long time, the energy thus used adds up. For instance, the amount of energy used every minute might not be significant, but if you leave the device in standby all night (say, for 12 hours), it can become quite significant.
A previous answer suggests disconnecting the unit from your electricity supply completely, leave it for a period of time (perhaps around an hour or overnight), and try it again.
Homedepot.com is an excellent place to buy standby generators online, and because it is from Home Depot, support can be easily obtained. standby .com is having a huge discount on standby generators right now.
Supervised by: Petr Mastný
what are the running costs for a PC monitor on standby
Yes. It is a dual sim phone with Dual standby.