The Blower Motor Resistor Pack is defective. Replace it.
blower motor bad or no power to it chech fuses blower switch blower motor
Defective Blower Motor Resistor Pack.
If the heater does not work, check: -heater fuses and/or any heater relays -heater control head -heater blower motor resistor
blower fan not working
I mean how do you disassemble the fan blower in a 1998 Jeep Grand Cherokee Laredo. how do you remove the blower fan from the car in the Grand Jeep Cherokee Laredo.
Check to see if you are getting power to the blower motor - if so motor is defective if not problem in circuitry to blower motor
The blower motor, or blower motor relay is probably out.
it up under the passenger side dash, the blower plugs into it. super easy fix
maybe blown fuse or the connection in the blower resistor is damaged or the blowre resistor module is burn out the blower resistor is located in front passinger under the dach boared
you need a new blower motor resistor with auto temp control
my infinity g-20 blower not working
Blown fuse, bad heater blower motor control switch, bad blower motor, or a bad blower motor resistor pack.
I had the same problem and I found it to be the blower motor resister. This is what controls the blower motor settings. You will have to find out where it is on yours.
Need more info like, is the blower working or not, is the air coming out cold or warm when it should be hot, is the air not coming out where it should be.
Chack the speed control switch and the resistor that controls the speed of the motor
Control switch on the dash needs to b replaced perhaps?
You will need to replace the blower motor control unit located inside the blower motor housing, this part is not the same as the part on standard explorers, it is not the same blower motor resistor.
Thermostat possibly stuck open or heater control valve broken. Now if you mean the blower motor has stopped working, check the fuse, blower motor itself, or the blower motor resistor pack.
Blower motor resistors are generally found nearby the blower motor.
it needs a blower motor resistor to make the fan settings work.If you replace the Blower MOTOR Resistor it should resolve the problem.
crown Victoria blower not working and head lights.
If you are referring to the blower motor only working on the high speed setting, then the problem is the blower motor Resistor Pack is defective. Replace it. It can be the blower motor speed control switch but not likely.
if you are talking about the HV/AC blower motor then the resistor pack is bad.
gants, I have Denali 2004, the rear AC blower not working