Having the brake light on whilst driving means that your front brake pads are worn out and need to be replaced. Once you put new pads on it, the problem stops. It is a very quick thing to do and cheap as well.
applying the brakes
faulty master brake system
No. Usually the parking brake is a separate mechanism from the driving brakes, and its usually only found on the rear wheels.
You use them by applying the brakes.
by applying the brakes on full
STICKING BRAKE CALIPER
Steering wheel vibration when applying brakes is usually caused by warped disc brake rotors
Is the brake fluid level low in your brake master cylinder in the engine compartment ?
He was driving and his brakes failed. He did later sue Rolls Royce for the brake failure. He was driving and his brakes failed. He did later sue Rolls Royce for the brake failure.
If the ABS and brake light are coming on while driving, this is an indicator that it is time to get your brakes checked and replaced. If not, the brakes will wear out causing you to not be able to stop.
Engine stalling when applying brakes is usually indicative of a leaky brake booster. The brake booster uses and stores engine vacuum while driving to assist your braking effort (power brakes). When the booster's air diaphragm is leaking air, applying brakes causes a substantial vacuum leak in the intake manifold, causing the engine to stall.
It is the distance between floorboard and pedal top, when the brake pedal is fully depressed (after applying brakes).