answersLogoWhite

Top Answer
User Avatar
Wiki User
Answered 2011-09-24 16:58:08

The Rover v6 has 3 timing belts (cam belts) they must be changed every 90000kilometers, if the belts snap you will have to replace all 24 valves, Do not forget to replace the idler pulley as well.

001
๐Ÿ™
0
๐Ÿคจ
0
๐Ÿ˜ฎ
0
๐Ÿ˜‚
0
User Avatar

Your Answer

Related Questions


The 1995 Land Rover Discovery has a timing chain.


no it doesn,t have a timing belt or chain.


I have no listing for a Land Rover Range Rover. Are you sure it has a timing belt an does not have a chain?


I believe that there is no timing chain, but a belt instead, which can be accessed behind a metal cover opposite the radiator.


it does not have a timing belt, it is a chain drive which should be good for the life of the car


If your engine is the 2.5 BMW straight 6 TD , it has a timing CHAIN. This engine is fitted not only to the BMW's, but also in the Omega, and Range Rover DSE. Hope this helps !


Set your #1 cylinder to TDC on the compression stroke.


2005 range rover hse valve timing!!! i need help on finding a link on how to do it thanks


Check the cambelt timing marks are properly aligned. Make sure you've used the right set of marks on each cam, they're different on the exhaust and inlet cams.


You change it according to the manufactures recommendations which will be at a certain mileage.


how often do i have to change the timing belt on my rover400


i have a rover 75, 1.8. it has about 26,000 miles on clock. when does my timing belt need changing


can you tell what are the marks for a rover 25 14 on a 52 reg for got to mark it up thanks


Just really want to know the timing belt settings please?


From Spokane Volvo Jag and Land Rover......the initial timing is 10 to 12 degrees!


I was looking at the Gates website ( they make timing belts etcetera ) and it shows for the 2.5 liter V6 engine in a 2003 Land Rover Freelander : Cam belt , front Cam belt , rear , 2 required ( so I'm confused , either it takes 2 timing belts or 3 timing belts )


how to find timing marks on the land rover freelander 2.5 engine,engine number 20t2n18n0033422



Petrol engines 10w/40 ACEA A2 (spec.) Diesel engines 10w/40 ACEA A3/B3 (spec.) ...or better.


Discovery Series 1 and Series 2 share engines but not all brackets with the Defender, this is the 200TDi, 300TDi, TD5 and V8 (where available).


Ford bought Jaguar in 99 but I believe they sold it in 2008 to an India co. called Tata Motors. Most Jaguars have engines manufactured by Jaguar. Jaguar in 2002 did use a Daimler Benz V8 engine. From 2000 to 2005 Ford did produce some engines for Jaguar that were made in the UK with some Ford parts. They also used a Land Rover engine in 2005-2006. Today some Jaguars have Jaguar engines and some have Land Rover engines.


No, although ordinary Ford V6 engines have been used in them. Since departing from manufacturing their own engines in the early 1950s, the Morgan car company has used Standard, Triumph, Fiat, Rover, Ford and BMW engines in their cars.


Make sure it has spark, to start with. If no spark I would check cam and or crank position sensor. Timing chain?


yes this is an interference engine damage to valves will occur if the timing belt breaks and the engine is turned


There are a number of reasons for this, but varies between petrol and diesel. Diesels dont like the cold. The diesel engines in the 75 are BMW common rail engines.



Copyright ยฉ 2021 Multiply Media, LLC. All Rights Reserved. The material on this site can not be reproduced, distributed, transmitted, cached or otherwise used, except with prior written permission of Multiply.