What the flim flam?
what is the tork for the intake(bolt 8mm) v6 3l 2001 Mazda tribute es
It is in a shlp manual from AUTOBOOKSONLINE.COM
10mm
Boston 3.0 liter engine rocker arm bolt torque specification is 20 pounds. The rocker arm bolts should be torqued in 10 pound intervals.
rocker arm stud is pulling out. how can i get it back in
to adjust the rocker arms you have to either tighten or loosen the top bolt on the rocker arm/arms that need to be adjusted. there is a specified torque for the rocker arms that you should follow to help you adjust the them
8mm-10mm typically
No, head bolt torque is much higher than rocker arms.
The correct torque for the rocker arm bolt is 14 N·m (124 lb in) plus 30 degrees.
Rocker arm stud nut or bolt 17 to 23 foot lbs
22 foot/lbs
To get to the cps you'd need to remove the power steering pump. It is located underneath with one 8mm bolt. After removing the bolt all that you need to do is pull it straight up. Good luck