And again important information is not provided that allows me to give an answer. What engine are you referring too? The Oil Pump Bolts torque specs are different for different engines. All Chevy V8's are 65 lb/ft. If you are talking about any other engine, then it can be from 20 lb/ft to 80 lb/ft.
torque setting for 91 cadillac water pump 4.9 engine?
Simply drain all oil from the oil pan. Remove all the bolts holding the oil pan in place. Clean the inside of the pan throughly and set it aside. Now look on the bottom of the engine block and you will see the oil pump. Purchase a new oil pump, and oil pan gasket, remove the old oil pump and install the new one, torquing the oil pump bolts to 65 lb/ft of torque. Reinstall the oil pan with the new gasket and tighten all the bolts in a criss cross pattern to the proper torque of 12 lb/ft. Pour in a fresh supply of oil.
The transmission has to come out, the pump is located be hind the torque converter. Slide the torque converter off the main shaft. There is 8 bolts holding the pump in. Two of the bolt holes will have larger threads in the pump. Thread larger bolts in the threads,they will act as a puller.
the torque you want to put on the water pump bolts are about 60 foot pounds of torque.
The 2001 Hyundai Elantra oil pan bolts torque should be 84-108 in-lbs
Drain the oil from the oil pan. Remove the oil pan by removing the oil pan bolts. Remove the oil pump retaining bolts. Reverse the process to install the new oil pump.
40 lbs on the water pump bolts
According to the chilton manual the 5 water pump bolts torque to 89 inch pounds. The four bolts that hold the water pump pulley torque to 18 foot pounds.
For the 1987 Chevrolet S-10 with a 2.8 liter engine, the torque specs for the cylinder head bolts is 40 ft. lbs. The torque specs for the crankshaft damper bolt is 70 ft. lbs. For the oil pump bolts and the oxygen sensor, the torque is 30 ft. lbs.
How do I change the oil pan gasket on a 1999 Dodge Intrepid with 3.5 engine, what is the proper torque for the bolts.
For the oil pan bolts on a 2001 Ford Escape, the torque should be 18 ft lbs. This is equal to 24.4 N.m.
Water pump attaching bolts: 30 ft-lbf Fan-to-water pump attaching bolts: 200 inch-pounds