0
Trying to install a sony explod car radio in a ford windstar lx 2002 but the harness my car is from a pioneer radio and the colors are different than sony explod wire harness?
Wiki User
∙ 14y ago
Yes, the new stereo wiring is always going to be different.
What you really really need to get is a wiring harness that will make it so much easier to "bridge" from the van wiring to the new stereo wiring, and most importantly allow you to do this without cutting the factory wiring!
There are a number of good sources for these inexpensive harnesses - nearly any auto parts, where you bought the radio, heck, even Walmart carries a good variety of them.
See "Related Questions" below for more about installing a new radio...
Wiki User
∙ 14y ago
Add your answer:
Earn +20 pts
What does a pioneer harness maker do?
A pioneer harness maker makes harnesses for horses
How do you install a pioneer radio in a 2001 ford foucs zx3?
U would have to get ford radio removal keys and remove the radio and then u would have to buy a dash kit and a wire harness for ur ford zx3 install the kit wire ur harness to the pioneer it should be color coded and install. Now some of the focus harness looks like it is too small to work in the radio harness but it will fit even though it is smaller
Does pioneer and kenwood CD receiver use the same wiring harness?
Not to be rude but that is a BIG no!! You would think that it would be the easiest way but its not. With most pioneer CD receivers they come with a quick disconnect wiring harness. Not only that the colors on the wires are different. Granted they still have the same red, and black wires which are the ignition wire and the ground. the best solution to this would be to compare both manuals and compare the wires before you install the new system.
Free Wiring for pioneer CD player?
Find a company that sells wiring harnesses and they will be able to get a harness. Most of these include the wiring details. Look on eBay for 'Stereo Wiring Harness'
Can you install a flip out stereo in a 2002 impala?
Yes you can install a flip out stereo in a 2002 impala I got a pioneer avh-5200 installed in my 02impala
How do you install a a pioneer CD player into a 1994 Oldsmobile Ninety-Eight?
Open the glove box and start there, remove any screws found holding the trim, gently pry to release tabs and find missed screws, use a proper wire harness adapter and dash istallation kit.
How do you reset a forgotten password for the Pioneer avic-f700bt?
disconnect the harness clip on the back of the deck for a couple minutes and then reattach it and you should be fine
What is the sensitivity of Pioneer speakers?
Pioneer has a wide range of speakers in its collection and they all have different properties. Picking one model, Pioneer TS-A1605C has a sensitivity of 90dB.
Will the Pioneer External DVD Drive come with all of the cables that i need to install?
As long as you do not buy an OEM version it will.
Where can i buy a pioneer tv online?
You can purchase a Pioneer tv online from several different stores. Amazon.com, Bestbuypcs.com, tamayatech.com, and www.printsavings.com all have pioneer tvs available for purchase.
To view a free wiring harness diagram for a Pioneer model number DEH-1600 car CD player radio to verify that you are not missing any wires from it?
no
How do you connect a pioneer CD player to a 1992 Plymouth voyager LE there is a relay blocking the rear speakers?
1.unplug the two wiring harnesses from the back of stock radio 2. cut them both off, leaving yourself enough wire to connect the harness from your new pioneer 3. the yellow wire from the stock radio harness is the memory, red is positive, and the ground is the wide cable you unhooked from the middle of the stock radio the front speaker wires are integrated in the first harness of the stock radio (the one with the yellow wire)and the back speakeres are in the other harness for example there my be two purple with stripe and/or two brown with stripe if not you may have to just match them up by listening to witch two wires make wich speaker come on by adjusting the fade and right and left controls on your pioneer. 4. Now to make the pioneer fit into that huge hole, assuming you have the metal thing that the new pioneer slides and locks into, you just take some thin 1/8 inch plywood and cut a square to the size of the huge hole with a utility knife, you can make a pattern from the face of the old radio and acually use the two screws to attach the piece of wood with those just drill holes now use that metal thing that the pioneer slides into and cut the acual whole for the sterio the same size and that.(the metal thing has to slide in) 5. pull the wire harness and antenna out and hook then to the pioneer slide the pioneer into place and put the stock panel back on. DONE
