0
list of heat exchangers
- shell and tube
- pipe in pipe (double pipe )
- floating head
- agitated film
- plate and frame
- extended surface (fin type)
- scrapped surface
- block type
Wiki User
∙ 12y ago
Wiki User
∙ 11y agoDonno
Add your answer:
Earn +20 pts
Heat exchanger for ammonia absorption refrigeration system?
there are two type of heat exchanger in absorption refrigeration, first is liquid heat exchanger and other is gas heat exchanger.both heat exchanger function is same, to transfer heat (hot medium to cold medium) without violate second newton law of thermodynamics. liquids heat exchanger is between boiler and absorber vessel mean while gas heat exchanger between evaporator and absorber.
What is heat exchanger duty?
The duty of a heat exchanger can be defined in an easy way as "The amount of heat exchanged from a fluid at a higher temperature to the fluid at lower temperature in unit time by a heat exchanger is called its duty"
How you can increase the retention time in shell and tube heat exchanger?
the most effective way to do so is to reduce the flow of the heat exchanger
Does effectiveness of a heat exchanger depend on operation condition?
Yes it does. As with any device, a heat exchanger is designed to work within certain parameters. If the conditions exceed these limits, the effectiveness of the heat exchanger is compromised, and my wind up not functioning at all.
What is the factors that effect on number of tubes in shell and tube heat exchanger?
The factors that are affected by number of tubes in shell and tube heat exchanger is the rate of heat transfer and flow rate.
What tester do you use to test an heat exchanger?
There are different types of heat exchangers. To get an answer the type of exchanger and what type of test you want to do should be stated.
Name the types of heat exchangers used as super-heaters?
Water tube heat exchanger swimming pool, Coaxial heat exchanger for laser and stainless steel exchangers are some of the heat exchangers used as super-heaters.
Heat exchanger for ammonia absorption refrigeration system?
there are two type of heat exchanger in absorption refrigeration, first is liquid heat exchanger and other is gas heat exchanger.both heat exchanger function is same, to transfer heat (hot medium to cold medium) without violate second newton law of thermodynamics. liquids heat exchanger is between boiler and absorber vessel mean while gas heat exchanger between evaporator and absorber.
Exchanger is not transfer heat why?
Heat exchanger manufacturers is an ISO 9001 certified company located in Coimbatore, Tamilnadu. The company started its functioning 2011 in, with a strong background in heat exchanger manufacturing. Our well-experienced and dedicated employees consistently thrive to serve our customers with the best heat exchanger solution. visit :: heatexchangersmanufacturers.in
What is heat exchanger duty?
The duty of a heat exchanger can be defined in an easy way as "The amount of heat exchanged from a fluid at a higher temperature to the fluid at lower temperature in unit time by a heat exchanger is called its duty"
Difference between heat exchanger and condenser?
actually there is no difference , infact condenser itself is a heat exchanger
What is different between cooler and heat exchanger?
Both the cooler and heat exchanger perform the same function as they remove heat from the engine. Two popular types of coolers are air-to-air inter-coolers that allow air to flow over fins and air-to-water models. The heat exchanger is often mounted in front of the radiator and uses airflow to reduce water temperature.
What type of exchanger is used to condense a vapor by cooling it?
A heat exchanger.
What is the difference between a calorifer and a heat exchanger?
Calorifer is a heat exchanger, with a specific of air (or other gas) preheat. Usually is directly in a Duct installed. Heat Exchanger usually is separate unit.
Why Expansion bellows are required in heat exchanger?
expension belows are used for heat exchanger to avoid thermal stress
What is difference between condenser and heat exchanger?
A heat exchanger is a device that transfers heat from one fluid to the others. A condenser is simply a heat exchanger. It compresses refrigerants into a hot gas to then condense them into a liquid. Majorly condenser is used to cool the required vapor and heat exchanger is used to heat the required liquid.
Function of heat exchanger?
There are actually many types of plate heat exchangers, and the YOJO brand has introduced brazed plate heat exchangers and gasket plate heat exchangers. Today is the home of brazed heat exchangers.Brazed plate heat exchangers have no headers, tie rods or sealing gaskets, and the plates are brazed at a temperature of 1100 ° C. During the assembly stage, a piece of brazing material (usually copper, and nickel) is placed between the two plates, the package is compressed, and then baked for several hour.BPHE is more compact and lighter, and the brazing material has the functions of both washer and frame. The intersection between the corrugations of the two coupling plates forms a dense network of contact points, which impart pressure tightness and generate vortex flow, thereby improving heat exchange. In this way, even at low nominal input speeds, the turbulence of the fluid is high, and for low flow rates, the fluid flows from laminar to turbulent.
