A router is used to route data packets between two networks. It reads the information in each packet to tell where it is going. If it is destined for an immediate network it has access to, it will strip the outer packet, readdress the packet to the proper ethernet address, and transmit it on that network.
Basically your router enables you to connect to your network using a wireless connection and it also enables several computers to connect to the internet from the same location and picks up the signals from other computers nearby and makes them visible to you so that you are able to connect to your network and also to other networks for an improved connection and allows much faster speeds than your basic modem
Routers examine the headers of IP packets of data to determine where to send the packets so that they reach their intended destination machine.
Without routers, every PC on a network would need to be connected directly to every other PC on the network to facilitate communications. Placing the router in the loop removes this need and each machine only needs to be connected to the router.
(row´ter) (n.) A device that forwards data packets along networks. A router is connected to at least two networks, commonly two LANs or WANs or a LAN and its ISP??s network. Routers are located at gateways, the places where two or more networks connect.
Routers use headers and forwarding tables to determine the best path for forwarding the packets, and they use protocols such as ICMP to communicate with each other and configure the best route between any two hosts.
Very little filtering of data is done through routers.
*This answer was taken from Webopedia.com
To route information to its destined location. To split the connection off from a modem. To provide a wireless connection. To provide firewall security that a modem doesn't.
Router provide the best way to data to travel.
Router enables communication across networks.
Router can be used to segment Network that can restrict broadcast traffic within Subnet.
ANDing is used by a router, to see if the host which has to be contacted, is on the local network of the router, or a remote network.
A router A firewall
Default gateway
to config a router manually
a router is a device used to connect two or more PC into a network using a LAN/Ethernet type cable. you can also have the wireless router to rid yourself of the cables when working on your laptop. In a home network your Internet connection will plug into the router and then several computers can connect to the Internet via the router.
a) A router b) A switch c) All of the above
stub router.
A g broadband router is used for receiving a network connection. In addition, after receiving the connection, the router gives off wireless connection to other devices.
The first router in the path to the destination network. The next hop router is the first (or next) router in the path to the destination network. Each router looks at the destination network in the packet, then consults the routing table to identify the next hop router to the destination network. The hop count identifies the numbers of routers in the path to the destination network. A default gateway router is a router that is used for packets used to external networks. Most routers do not have a default gateway setting, but instead use a default route setting which identifies the next hop router for all unknown networks.
Yes. A router is commonly used for this purpose. A computer with two network cards can also be used (for fairly small networks).Yes. A router is commonly used for this purpose. A computer with two network cards can also be used (for fairly small networks).Yes. A router is commonly used for this purpose. A computer with two network cards can also be used (for fairly small networks).Yes. A router is commonly used for this purpose. A computer with two network cards can also be used (for fairly small networks).
a gateway
ROUTER