500mA = 500 miliamper
1000mA = 1 amp so 500mA = .5 amps
Yes you can. But it may damage your computers power supply.
Power = volts x amps, so your example will be 12 x 0.5 = 6 watts. (500mA = 0.5 amp) Note we don't talk of 'watts per hour', it is just watts. 1 watt = 1 joule per second
No. 0.83 Amperes = 830 milliamperes. 1A = 1000mA, it's a base-ten system, just like meters or liters.
150 mA is.
"mA" represents "milliamp" so 5.0 mA would be 0.005 Amps, which is not half an amp (0.5 A) Milli means one thousandth so 500mA would be half an amp.
No, the charger has to be equal to or greater than the device it is charging.
p=i square x r = 500ma * 500ma = .25 * 4.7k = 1175 watts
i am not sure, BUT according to the answer in this post:Can_you_use_a_9V_600mA_adapter_on_a_9V_400ma_scanneryou need an adaptor of 9v and AT LEAST 500mA (assuming that the appliance draws 500mA)
Yes, you can charge a 500mA battery with a 1300mA charger.
Using a 12v 600ma source is allowing 12 volts and 600 amps of power. If the device requires a 12v 500ma source, the larger source is acceptable. Please note that it will only be drawing on 500ma of the available 600ma.
For power supplies, if the voltage is the same, the rated amperage is equal to or greater than the requirements of the device, and the plug fits, the supply is safe to use.
No.If it is AC output, it will blow out the power circuits of the DC device.If it is DC output, it doesn't have enough current capacity for the load of the DC device.If you want to power a DC device with a wall wart, make sure the wart is:DC outputCorrect polarity (some have reversible polarity)Exact same voltage as the deviceGreater than or equal to current rating of the device
It takes about 2 hours to charge and will charge from any USB port or USB charger that delivers 500ma or more.
5.1v is the Voltage, You need to also look at what the Amperage rating is on the charger. 500ma, 1000ma, etc. How many Milliamps?
Yes - what matters is the voltage - it has to be the same. The device will only draws 1A as needed - the adaptor with higher amp,i.e, 2A is fine. As long as the adaptor has amps equal to or greater than those of the device, it will be ok!
7.5v 500mA Dc charger
yes, if the other adapter is a va