WHAT IS THE IMPORTANCE OF REMOTE SWITCHES?
We need you to answer this question!
If you know the answer to this question, please register to join our limited beta program and start the conversation right now!
How do you program a sears craftsman garage door opener 139.53100?
On the back of the garage door opener near the knobs for up and down pressure, is a set of 3-position dip switches. The dip switches can be hard to see since there is a set of wires that hang down and may cover the switches. Set the dip switches on the garage door opener and inside your remote to match. Dip switches 8 and 9 in the remote must be set to the zero position. Once the switches match the remote should be able to operate the door opener. If you have bought a universal remote, such as the Chamberlain Clicker, that has 2-position dip switches, you will have to set the dip switches on the 139.53100 to either the + or - (up or down) positions. You cannot use the zero position with a 2-position remote.
Asked in Electrical Troubleshooting
When using the remote for a Hunter fanlight the light will turn on-off using the remote-but will not turn on using wall switch?
Asked in Remote Control Devices
How do you program a multi code linear garage door opener?
These remotes are based on "pin switch" settings matching between the remote and the receiver (ie: electric gates or garage door opener) Your remote has an access door to access its battery and dip switches. They are a series of many little white switches that are either in the "up" position or the "down" position, from left to right. The device you are controlling (gate or door, etc) has similar switches set somewhere in its adjustment settings. You must match the position of the switches on the remote to exactly match the settings on the receiving device. Sometimes, you can just find a remote that already works, and simply make sure your remotes switches are matched to the switch settings of the remote that already works
How do you program a remote keypad for a sears craftsman door opener model 139.53603?
There are 2 ways to program a remote to open a garage door. 1 if the opener uses dip switches, open the cover and see if it has a row of switches that can be put into 1 of 3 positions, if so just make the remote match the opener. 2 the opener will have a " learn " button on it, press it and then press the button on the remote and it will learn your remote signal.
Asked in Plumbing
How can you control level in a sump that is remote to my pump?
Asked in Yu-Gi-Oh
Can remote revenge be used against sakuretsu armor?
Can you install a remote control to control two wall switches and a ceiling fan and a table lamp?
Yes. the two switches are called '3-way' switches. You will have to turn the fan/light on with one of the switches and leave BOTH switches in that position. The remote control unit will have to be wired in between the switch that is supplying power to the devices and the devices. This is the simplest way. You could also disable one of the switches and replace the remaining switch with the RC unit. If you are not sure how to deal with 3-way switches, learn about them first, or call a good electrician to do all of the work. Remeber that the black wire is hot, but only if the house was wired properly in the first place.
Asked in Cisco
What is the purpose of Cisco routers and switches?
How does a remote control operate a switch from a distance?
Asked in Atmospheric Sciences
What is the importance of atmospheric window in remote sensing?
I am trying to program a sears craftsman remote garage door opener. Where is the button on the back of the garage door opener power unit that I need to press in order to program the remote?
I have recently had one of my two Craftsman garage door opener stolen model 139.53779 green light How do I reset the garage door opener so that it will no longer except codes from the stolen remote?
There's a little door somewhere on the garage door opener--the unit hooked to the door itself, not the remote in your car. If you open the door you'll find a little plastic block that has switches on its face. That's where the code is set. Reset it to anything else, making sure to reset the switches in the remote, and the stolen remote will trouble you no further.
Asked in Yu-Gi-Oh, Cheat Codes, Collectible Card Games
Can the trap card remote revenge negate the effects of Gandora the Dragon of Destruction?
Asked in Cadillac DeVille
Cadillac 1992 sedan deville and there are two switches under the dash and you have no idea what they do help please?
do they look FACTORY !! or do they look like a after market switches . possible valet switch for after market Alarm system ..possibley flood lights .. was there stereo wires in trunk could be a remote wire for amp endless applications for those switches....if they are not factory switches . does the car over heat could be a direct switchable for fans in front of radiator follow the wirs ...
Asked in Computer Monitors, Computer Networking
Is remote infrastructure monitoring and network monitoring same?
Sort of. Remote infrastructure monitoring would fall under network monitoring. Network monitoring in general focuses on the monitoring of your network infrastructure: things like switches, routers, etc. Remote just means your monitoring it from outside the network, and is a feature available in many solutions.
Asked in Remote Control Devices
Why does the garage door close when the button is pushed but does not open or close with the remote?
Asked in Environmental Issues
What is the Importance of spatial resolution in remote sensing?
Asked in Technology
What kinds of switches are available from Carling Technologies?
Asked in Toyota
You can unlock and lock your 2002 Toyota 4 Runner using the factory remote but the door switches will not lock your unlock the vehicle from the inside?
Asked in Lexus GS, Wireless Communication
What is Remote infrastructure management?
Remote Infrastructure Management (RIM) is defined by analysts as the remote support and management of various IT services that are related to infrastructure support from global delivery sites. The service offering encompasses remote monitoring and management, which includes support, administration, maintenance, troubleshooting, and performance enhancement. These services include the remote system monitoring of the following: data center, networks (WAN and/or LAN including switches, routers, and hubs), database administration, desktops, servers and related peripherals and e-mail systems.