Back, it is driven off the distributor shaft.
first you need to drain the oil then you unbolt the motor mounts and lift the motor up as far as it will go. unbolt oil pan and drop down as far as it will go then reach your hand up and unbolt oil pump drop pump in pan and slide pan out. put new pump in pan and slide pan back in bolt oil pump back up and then put pan back on and bolt motor mounts back up.
The engine oil pan is the lowest part of the engine, front to back.
How do I take the oil pan off The oil pump is on the front of the engine behind the main pulley on the Crankshaft, behind the timing belt. NOT in the Oil Pan.
The oil pump is located inside of the oil pan (where you drain the oil). You will have to remove the oil pan in order to access it. Depending on its location you may have to remove the front axle.
It is mounted on the FRONT of the crankshaft, Behind the timing chain cover. IT IS NOT IN THE OIL PAN.
The oil pump is inside the oil pan, the oil pan must be removed to gain access to the oil pump
it is on the front side (timing side) of the block and it is driven by the crank. to get to the oil pump you have to remove the timing cover and the oil pan.
drain motor oil, remove oil pan , locate oil pump , it has 2 crews. replace oil pump with new one. replace oil pan gasket with new , put oil pan back make sure all screws are tight but not tooo tight . put back motor oil 4 1/2 to 5 quarts .. done check for leaks around oil pan.
Remove the oil pan, remove the pump, and replace it.Remove the oil pan, remove the pump, and replace it.
The oil pump is located inside the oil pan. When you remove the oil pan the pump will be bolted to the engine block inside the oil pan.
The oil pump is located inside the oil pan; To get to the oil pump you have to take off the oil pan.
The oil pump is located inside the oil pan. You have to drop the oil pan to replace the oil pump.